Scribd
Upload
2K views1 page

Grouting Checklist

The document provides a checklist for inspecting grout material, equipment, application, and recording details during a grouting project. It includes checking preparation of the surface, material properties, mixing and applying grout, and documenting the process.

Uploaded by

dheerendrapanwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Grouting Checklist

The document provides a checklist for inspecting grout material, equipment, application, and recording details during a grouting project. It includes checking preparation of the surface, material properties, mixing and applying grout, and documenting the process.

Uploaded by

dheerendrapanwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Grouting Inspection Checklist: A detailed checklist form used for assessing and documenting the grouting inspection process, covering preparation, materials, equipment, and inspection items.

SIDE : PM-305 MIRROR WORK TITLE: GP2 GROUTING GROUTING INSPECTION CHECK LIST

DATE :
PROJECT OWNER: ALLEIMA INDIA PVT LTD RAJPUR CONSULTANT: LOCATION :
BUILDING :
MAIN MATERIAL :
CONCESSIONAIRE : PMC JLL CONTRACTOR : MARS ENTERPRISES START OF INSPECTION :
FINISH OF INSPECTION :
PREPARATION
No. DESCRIPTION OK NO REMARKS
1 Roughning (sufficent/ approved) Thick saw and hack out all unsound concrete
2 Cleanliness of Surface Free of dirt, oil, grease, loose material
3 Temperature (as per manufacture spec.) Minimum 10 oC - Maximum 40 oC
4 Thickness Not Exceeds 100mm Coarse aggregate needed if > 100mm
5 Formwork (size, firmly & water tight) Recommended to apply easy removal agent
6 Calculation Material to be Used To mix materials in sufficient amount
MATERIAL
No. DESCRIPTION OK NO REMARKS
1 Grouting Material Fosroc Conbextra approved material
2 Condition of Material
3 Water Clean water
4 Bonding SBR chemical Should be approved material
6 Clean Coarse Aggregate 10mm (if needed) Needed for thickness exceeds 100mm
7 Curring
EQUIPMENT
No. DESCRIPTION OK NO REMARKS
1 Low Speed Drill with Mixing Paddle max. 500-600 rpm
2 Container Clean and in sufficient size
3 Shovel/ Trowel/Spatula Note: immediately clean by water after use
APPLICATION (After all stipulated above are OK)
No. DESCRIPTION OK NO REMARKS
1 Damp the Surface of Concrete Saturated surface dry, but no standing water
2 Mixing until Even and Consistent 2-3 minutes
3 Pouring/ application Immediately and no leaking of form work
4 Thickness of Pouring Min. 10 mm, max. 100 mm per pour
RECORDING
No. DESCRIPTION RECORD REMARKS
1 Temperature oC
2 Batch Number IN1MF00792470A4
3 Quantity of Grouting Material kg Fosroc Conbextra: 30kg/ bag
4 Quantity of Water ltr flowable 4.5 ltr/ bag
5 Quantity of Coarse Aggregate (if needd) kg Maximum 50%
6 Time of Finished Mixing AM/PM Mixing 2-3 minutes,
7 Time of Finished Application AM/PM
9 During and After Treatment Photograph
INSPECTED BY: VERIFIED BY:

DATE: DATE:

DATE : : : : : : No. OK NO 1 2 3 4 5 6 No. OK NO 1 2 3 4 6 7 No. OK NO 1 2 3 No. OK NO 1 2 3 4 No. 1 2 3 4 5 6 7 9 CONCESSION

You might also like