PROFESSIONAL SUMMARY
A result-oriented, hardworking and confident professional with seventeen years experience in the oil and gas
industry, a Control room operator/field operator with background training in Mechanical engineering. Have
experience and knowledge in Project and operations management, Safety Management, instrumentation and
control, maintenance planning, scheduling, installation and commissioning. A proactive, competent and self-
motivated person, a good team player, resilient and develop own strategies for achieving set goals and
objectives
WORK HISTORY
Control Room Operator, Bonny oil and gas terminal.
Shell Petroleum Development Company - Port Harcourt, Rivers State
Control Room Operator, SOKU GAS PLANT Shell Petroleum Development Company - Port Harcourt, Rivers State
06/2015 - 06/2018
Controlled Startup, shutdown and optimization of crude dehydration and stabilization unit, emulsion treatment
unit, produced water unit
Recorded data in production logs for progress monitoring in terminal processing.
Safely received crude into the Terminal for dehydration, stabilization, storage and export.
Monitored instrument indicators and warning signals to ensure process conformity 100%.
Conducted proactive monitoring of all process parameters on PAS and ensured they were within their
operating envelope
Supported production needs by performing routine tasks using
standard procedures and equipment.
Demonstrated good communication skills through positive
interactions with site managers, outside contractors and junior on-site staff.
Actively participated in team projects and met critical deadlines.
Worked with supervisor to coordinate workflow and updated daily production team accordingly.
Followed safety procedures during crude oil export operations by keeping compliance with Department of
petroleum resources (DPR) regulations.
Monitor flow to COCs, AOCs and LLODs to avoid spilling into the environment.
Documented chronological information in daily logs to uphold
company standards and meet regulatory record-keeping requirements.
08/2008 - 05/2015
Enhanced efficiency by 98% using Permit coordination facility (PCF), PTW system and SAP processes, among
other tools.
Carry out inside proactive monitoring of all process parameters on PAS and ensured they were within their
operating envelope
Continuously improved process effectiveness, performing tests to obtain data to define parameters and adjust
process controls.
Monitor equipment performance and effectively troubleshoot any process upset
Performed effective troubleshooting of equipment, promptly
performing repairs to minimize operational anomalies.
I conducted regular safety inspections to ensure compliance with the safety requirements for chemical
production and machinery use.
Recorded work performed and parts used for accurate engineering reports.
Mentored junior team members to develop applied technical abilities.
05/2001 - 08/2008
Mechanical Technician, Power Generation and Distri
Shell Petroleum and Development Company (SPDC) - Port Harcourt, Rivers State
Ensured raw electrical power availability of at least 99.7% in shell
industrial and residential area
Ensured minimal downtime of the turbine following a fault or component failure
Developed works cope and cost estimates for maintenance activities
Compliance with electrical safety rules in maintenance activities
Execution of scheduled and ad-hoc maintenance activities to maintain asset integrity
Isolation and de-isolation, pre- and post-maintenance job•
Supervised contractor to ensure adherence to standards and works cope
•
Ensured the existence of valid contracts for all relevant work activities
Organized at least nine (9) sub-team HSE meetings with contractors
Conducted monthly HSE audits on sectional facilities
Ensured at least 85% close out of HSE audit items at all time
Maintained records of generated waste at facilities
Operated and carried out maintenance of caterpillar generating sets like D3508, D3412, etc... in industrial and
residential areas of SPDC Port Harcourt
EDUCATION
Certificate of Higher Education: Mechanical Operations, 12/2000
Special Intensive Training Programme (SITP/2) – Port Harcourt
Diploma of Higher Education: Mechanical Engineering, 09/1997
Federal Polytechnic Nekede Owerri – Owerri
