Grade 11 Physical Sciences 2019 Guide
Grade 11 Physical Sciences 2019 Guide
Physical Sciences
Gr.11 Junior Tukkie Summer School 2019
Physical Sciences
Contents
3 Circuits 29
Force diagrams: The forces on the object are drawn where they act.
⊲ Weight (Fg ) is drawn from the centre of mass.
⊲ Contact forces: Frictional force and normal force is on/from the surface.
Free body-diagram: Forces are drawn emanating from the object (dot).
N F N
f
f
F
Fg F
g
Resultant or net force is the single force whose effect is the same as the individual
forces acting together.
Head-to-tail Tail-to-tail
The resultantn starts where the first vec- Complete the parallelogram. The resul-
tor starts and ends where the last vector tant is the diagonal of the parallelogram.
ends.
F1 F2 F1
Fres Fres
F2 1
Components are two perpendicular vectors, that gives the original vector when they
are combined.
Fy F
Θ
Fgk
Θ
F Fg⊥
Θ Fg
QUESTION 1
1.1
Indicate which method of vector addition is used and draw the resultant vector.
1.2
Three forces A, B and C acts on an C C
object. Indicate whether the following B B
statements are true or false. A A
b A+B+C=0
c The three forces are in equilibrium.
Normal force, N, is is the force or the component of a force which a surface exerts
on an object with which it is in contact, and which is perpendicular to the surface.
N
N
N N ◦
Fy
ƒk F ƒk ƒk
• • F • F Θ◦
Fgk
Fy Fg⊥
Fg Fg Fg Θ Fg
Frictional force, f, is the force that opposes the motion of an object and which acts
parallel to the surface.
Static frictional force, fs , is the force that opposes the tendency of motion of a
stationary object relative to a surface (parallel with the surface).
f(m)s = μs N μs is the static frictional coefficient.
Kinetic frictional force, fk , is the force that opposes the motion of a moving object
relative to a surface (parallel to the surface).
fk = μ k N μk is the kinetic frictional coefficient.
f (N)
Just before
moving
f(max)s
moving
fk
ill
st
ng
di
an
st
FT (N)
1.4
A crate (10 kg) rests on the floor. The static and
kinetic frictional coefficients are 0,2 and 0,18. John
exert a horisontal forces to the right on the crate.
a. Draw a labelled free body diagram of the forces acting on the crate.
b. Calculate the magnitude of the maximum static friction between the floor and the crate.
c. Calculate the magnitude of the kinetic frictional force between the floor and the crate.
d. John exerts 18 N to the right on the crate. Will the crate start to move? Determine the type
and magnitude of the frictional force.
e. John exerts 20 N to the right on the crate. Will the crate start to move? Determine the type
and magnitude of the frictional force.
f. Draw a graph of the frictional force on the crate versus the applied force.
g. The crate is turned on its side and the contact area is reduced. How will this influence the
magnitude of the kinetic frictional force? Write only SMALLER, BIGGER or CONSTANT.
Two ropes are tied to a heavy crate. One of the ropes is tied
1.6 to the ceiling.
1.7 A crate of bananas is on the back of a truck. The truck stops quickly and the crate moves forward.
Use scientific principles to explain this phenomenon.
Inertia is a property of matter. It is the resistance of any physical object to any change in
its state of motion; this includes changes to its speed, direction or state of rest. It is the
tendency of objects to keep moving in a straight line at constant velocity. Mass is a measure
of the amount of inertia.
Determine the mass m and the angle θ with two different methods:
The kinetic coefficient of friction between block A and the surface is 0,2.
The pulley is frictionless.
Calculate the tension in the rope.
A B
Components
Free-
body-
diagram
fk
Fnet
1.8 Two crates with apples are being pulled up an inclined surface with a constant force F.
The inclined surface is at an angle of 30◦ with the earth. Crates A and B have masses of
6 kg and 4 kg. Both crates have kinetic friction coefficients of 0,2 with the surface. The
crates accelerate from 2 m·s−1 to 2,5 m·s−1 over a distance of 4 m.
F
a. Are the forces on the crates in equilibrium? B A
Explain. 4 kg
6 kg
T
b. Draw labelled free force diagrams
to show ALL forces acting on the crates.
30o
c. Use equations of motion to calculate the magnitude of the acceleration of the crates.
(ans 0,28 m·s−2 )
Positive ions
Symbol Name Symbol Name Symbol Name
H+ hydrogen Be+2 berillium Al+3 aluminium
Li+ lithium Mg+2 magnesium Fe+3 iron(III)
N+ sodium C+2 calsium Cr+3 chromium(III)
K+ potassium Cr+2 chromium(II) As+3 arsenic(III)
Ag+ silver B+2 barium
Hg+ mercury(I) Sn+2 tin(II)
C+ copper(I) Pb+2 lead(II)
N H4 + ammonium Zn+2 zinc
Fe+2 iron(II)
Ni+2 nickel
C+2 copper(II)
Negative ions
Symbol Name Symbol Name Symbol Name
F− floride O−2 oxide N−3 nitride
Cℓ− chloride S−2 sulfide P O4 −3 phosphate
Br− bromide C O3 −2 carbonate
− iodide S O4 −2 sulphate
O H− hydroxide S O3 −2 sulphite
N O3 − nitrate Cr O4 −2 chomate
N O2 − nitrite Cr2 O7 −2 dichromate
Cℓ O3 − chlorate Mn O4 −2 manganate
Mn O4 − permanganate C 2 O4 −2 oxalate
O3 − iodate (COO)2 −2 oxalate
C H3 C O O− ethanoate(acetate)
1 sodium bromide
2 aluminium chloride
3 lithium oxide
4 magnesium hydroxide
5 sodium sulphide
6 copper(II)iodide
7 sodium sulphate
8 zinc nitrate
9 sulphur(IV)oxide
10 ammonium carbonate
11 potassium dichromate
12 iron(II)sulphide
13 manganese dioxide
14 nickel oxalate
15 sodium acetate
N V
n= m n= n= c= n
v or c= m
M NA Vm Mv
4. Calculate the mass of silver nitrate in 250 cm3 of a 0,18 [Link]−3 solution.
a) 300 cm3 solution contains 100 b) How many moles is 9,03 x 1024 c) How many mol CO2 (g) are
g NaCl. Calculate the solution NH3 molecules? there in 4,48 dm3 at STP?
concentration.
d) What is the volume of 2,7 mol e) What is the mass of f) How many molecules are there
N2 (g) at STP? 3,6 mol potassium sulphate? in 4,2 mol ammonia?
g) Caluculate the mass of HCl(g) h) Calculate the mass of sodium i) What volume of a 0,3 [Link]−3
that fills 250 cm3 at STP. carbonate in 200 cm3 of a hydrochloric acid solution contains
0,3 [Link]−3 solution. 22,5 g hydochloric acid?
j) How many ammonia molecules k) Calculate the mass of 11,2 dm3 l) Calculate the volume occupied
are there in 33,6 dm3 gas at STP? of ethane gas (C2 H6 ) at STP. by 100 g of oxygen gas at ATP.
Stoichiometry
When the substance given is not the substance asked, the ratio must be used.
This step must be shown even if the ratio is 1:1
Calculate the mass Na2 O that can be produced when 4,93 dm3 oxygen gas (at STP)
reacts with an excess of sodium. Na + O2 Na2 O
4Na + O2 2Na2 O
n n
v = 4, 93 dm3 m =?
v m
n = O2 : Na2 O n =
Vm M
1 : 2 m
4, 93 0,22 : x 0, 44 =
= 62
22, 4 1×x = 2 × 0,22
x = 0,44 mol Na2 O m = 27, 28 g Na2 O
= 0, 22 mol O2
1. What mass of C4 H10 is required to react completely with 4,48 dm3 oxygen gas at STP?
2C4 H10 + 13O2 CO2 + 10H2 O
3. Calculate the volume nitogen dioxide (at STP) that will be produced when
1, 5 × 1024 N2 O5 molecule decompose.
2N2 O5 (g) → 4NO2 (g) + O2 (g)
4. Calculate the volume of a 0,2 [Link]−3 HCℓ -solution that is needed to produce
3,36 dm3 Cℓ2 (g) at STP.
Avogadro’s law: Equal volumes of all gasses, at the same temperature and pressure, have
the same number of molecules (and therefore the same number of moles).
Gas volume to gas volume calculations: Reagents (in the same container) are at the same
temperature and pressure. The volume ratio is the same as the mole ratio.
Calculate the volume of ammonia gas that will be produced when 2,24 dm3 nitrogen gas
reacts completely with an excess of hydrogen gas.
N3 : NH3
mole ratio 1 : 2
volume ratio 1 : 2
2,24 dm3 : x
4,48 dm3 NH3 is produced
4 The following reaction take place in a container where CONDITIONS ARE NOT STP!
Calculate the volume nitogen dioxide that will be produced when 4,86 dm3
N2 O5 decompose.
2N2 O5 (g) → 4NO2 (g) + O2 (g)
When the substance given is not the substance asked, the ratio must be used.
This step must be shown even if the ratio is 1:1
How many moles of hydrogen atoms are there in 448 cm3 ammonia gas at STP?
| {z } | {z }
asked given
v
nNH3 = NH3 : H-atoms
Vm
1 : 3
0, 448
= 0,02 : x
22, 4 1×x = 3 × 0,02
= 0, 02 mol NH3 x = 0,06 mol H -atoms
2. Calculate the number of moles of ions in 200 cm3 of a 0,25 [Link]−3 zinc nitrate solution.
Limiting agents
a.
m V For all the Na
n= n= Na : O2
M Vm
483 129, 92 4:1
= = 21 :
23 22, 4
= 21 mol Na = 5, 8 mol O2 5,25 mol O2 required
O2 available > O2 required
available available ∴ O2 in excess
∴ Na limiting agent
c. m
O2 remain = 5,8 - 5,25 n=
= 0,55 mol M
m
0, 55 =
32
m = 17, 60 g O2
1) 100 g nitrogen and 20 g hydrogen are available. N2 (g) + 3H2 (g) → 2NH3 (g)
19,5 g CaO and 200 cm3 of a 2 [Link]−3 HCl solution are mixed.
mass of compound(theoretical)
% purity = × 100%
mass of sample
actual yield
% yield = × 100%
theoretical yield(possible)
4) 20 g of a contaminated nickel sample reacts with hydrochloric acid. If the sample is 70% pure,
calculate the volume hydrogen gas that is produced at STP.
Percentage composition
Testosterone, the male sex hormone, contains only carbon, hydrogen and oxygen. The
hormone consists of 79,12 %C, 9,79 %H and 11,09 %O by mass. Each molecule contains two
O atoms. Prove that the empirical formula of the compound is C19 H28 O2 .
m 79,12
n= M
C: n= 12
= 6, 593 mol
H: n = 9,79
1
= 9, 790 mol
11,09
O: n = 16 = 0, 693 mol
C : H : O
6, 593 : 9, 790 : 0, 693 n
6,593 9,790 0,693
0,693
: 0,693
: 0,693
Divide by smallest
9, 51 : 14, 13 : 1 0,5 too much to round up/down ∴ x2
19 : 28 : 2 Ratio
C19 H28 O2 Empirical formula
3 Circuits
QUESTION 1
A B C D
E F G H
QUESTION 2 X
A B C
D E F
QUESTION 3
A.
Principles
SERIES
VT
V1 V2
V1
V2
Iseries = I1 + I2 VT = V1 = V2
1 1 1
= +
Rk R1 R2
QUESTION 4
A A1 B A1
A2
A3 A2 A3 A4
A4
C A1 D V A1
A2
A5
A3
A4 A2
A3 A4
E A1
A2
A7
A5 A3
A6
A4
QUESTION 5
A V1 B V1
V2 V3
V2
V4
V3 V4
V5 V5
C D V1
V1
V4
V2
V2
V3 V3
E
V1 F
V1
V2 V2 V4
V3 V3
G H
V1 V2 V1 V2
V5
V3 V4 V3 V4
QUESTION 6
A 3V 4V B 4V
V1 V2 V1 V2
V3 V4 V3 V4 6V
2V
12V
QUESTION 7
The internal resistance is negligible.
A V 4V
6Ω
3Ω
2A A V 3V
A1
2Ω
1A
3A A V
A1
2Ω
3A A V 8V
R
4Ω
QUESTION 8
V 2 Δt
W = Vq = VIΔt = I2 RΔt =
R
8.1 Calculate the amount of energy that is needed to send a current of 2 A for 10 minutes through a
2 Ω-resistor.
W V2
P = Δt = IV = I2 R =
R
8.2 20 000 C charge moves in 2 minutes through a resistor when the potential difference over the
resistor is 12 V. Calculate the power delivered by the resistor.
Electricity use (energy) is measured in kilowatt-hour (kWh). 1 kWh is the energy used
when 1 kW is used for an hour.
P= W
Δt
with P in kW, W in kWh and Δt in hours.
8.3 Calculate the cost to use a 3000 W oven for 2 hours if the tariff is R 1,40 per kWh.
8.4 Calculate how long a 800 W microwave can function for R 100,00 if the tariff is R 1,80 per kWh.
QUESTION 9
9.1 Two bulbs (resistance R and 2R) are connected. Which of the bulbs will glow brighter when . . .
R 2R
R
9.2 A electric heater is marked 2000 W, 240 V. The tariff for electricity is R 1,50 per kWh.
a. What does 2000 W indicate?
b. Calculate the current through the heater.
c. Calculate the energy (in kWh) needed to use the heater for 80 minutes.
d. Calculate the cost to use the heater for 80 minutes.
Internal resistance
Switch open:
Voltmeter reads EMF if connected to both sides of the cell
Voltmeter reads zero if not connected to both sides of the cell
Switch closed:
Voltmeter over cell reads Terminal potential difference (smaller than EMK)
Voltmeter reads zero if connected over a conductor, ammeter or switch
(no energy change)
V1
V2
V3
V4
V5
VXY
In the circuit represented below, the battery has an emf of 10 V and an unknown
internal resistance. Voltmeter V1 is connected across the battery and voltmeter V2 is
connected across the open switch, S. The resistance of the connecting wires and
ammeter can be ignored.
emf = 10 V;
6: 3:
A
1: S
V2
Switch S is open.
In the circuit represented below, the lamp L has a resistance of 43 :, and the internal
resistance of the battery is 5 :. The reading on the voltmeter decreases by 4,5 V
when switch S is closed.
r=5:
L
43 :
A R1
30 :
R2
20 :
10.2 Calculate the current in the battery when switch S is closed. (4)
10.4 Calculate the reading on the ammeter when switch S is closed. (5)
10.5 Will the power dissipated by the lamp INCREASE, DECREASE or REMAIN
CONSTANT when resistor R2 burns out while the switch is closed?
Give a reason for the answer. (3)
TOTAL QUESTION 1: 60
Reactions of acids
Acid and reactive metal → salt + hydrogen gas
2HCl(aq) + Zn(s) → ZnCl2 (aq) + H2 (g)
H2 SO4 (aq) + Mg(s) → MgSO4 (aq) + H2 (g)
Neutralisation(exothermic)
Acid and metal hydroxide → salt + water
2HCl(aq) + Zn(OH)2 (s) → ZnCl2 (aq) + 2H2 O(l)
H2 SO4 (aq) + 2NaOH(aq) → Na2 SO4 (aq) + 2H2 O(l)
If the base is NH3 :
2HCl(aq) + NH3 (g) → NH4 Cl(aq) or
2HCl(aq) + NH3 (g) → NH4 + (aq) + Cl− (aq)
Write four balanced equations to show how magnesium chloride can be prepared from an ap-
propriate acid.
Acids Bases
Brønsted-Lowry: Proton donor Brønsted-Lowry: Proton acceptor
HNO3 (g) + H2 O(l) H3 O+ (aq) + NO3 − (aq) NaOH Na+ (aq) + OH− (aq)
nitric acid H2 O
H2 SO4 (l) + 2H2 O(l) 2H3 O+ (aq) + SO4 −2 (aq) LiOH Li+ (aq) + OH− (aq)
sulfuric acid H2 O
covalent → no ions → ionises Covalent NH3 ionises and forms NH4 OH that weakly dissociates
CH3 COOH + H2 O(l) H3 O+ (aq) + CH3 COO− (aq) NH3 + H2 O NH4 + (aq) + OH− (aq)
acetic acid acetate ion
ethanoic acid ethanoate ion
conjugated pair 2
base conj acid
N H3 (g) + H2 O(ℓ) NH4 + (aq) + OH− (aq)
acid conj base
Conjugated conjugated pair 1
acid-base pair
Dilutions C V = C V
| 1{z 1} | 2{z 2}
old new
NB. New volume = original volume + added water !!
c. 25 ml water is added tot 75 ml of a 0,13 [Link]−3 sulphuric acid solution. Calculate the
concentration of the diluted solution.
d. Calculate the mass of NaOH that must be dissolved in 240 cm3 of water to give a
0,04 [Link]−3 solution.
e. Calulate the volume of water that must be added to 30 cm3 of a 0,06 [Link]−3
hydrochloric solution to dilute it to a 0,04 [Link]−3 solution.
BEWEGING/MOTION
v f = vi + a Dt Δx = v i Δt + 21 aDt 2
æ v + vf ö
2 2
v f = v i + 2aDx Δx = ç i ÷ Δt
è 2 ø
KRAG/FORCE
Fnet = ma w = mg
Gm1m 2 fs(maks )
F= ms =
r2 N
f
mk = k
N
1
v=fl T=
f
ni sinqi = nr sinqr c
n=
v
ELEKTROSTATIKA/ELECTROSTATICS
kQ1Q 2 F
F= (k = 9,0 x 109 N×m2·C-2) E=
r2 q
kQ W
E= 2 (k = 9,0 x 109 N×m2·C-2) V=
r Q
ELEKTROMAGNETISME/ELECTROMAGNETISM
DF
e=-N F = BA cos q
Dt
Q V
I= R=
Dt I
1 1 1 1
= + + + ... R = r1 + r2 + r3 + ...
R r1 r2 r3
W = Vq W
P=
Δt
W = VI D t
P = VI
W= I2R D t
2
P = I2R
V Δt
W= V2
R P=
R
p1V1 p 2 V2
pV nRT
T1 T2
m N
n n
M NA
V n m
n c OR/OF c
Vm V MV