Inspection Certificate 3.

1 According To EN 10204 : 2005

CONSINGEE Test Certificate No. : 385814
Date of Issue : 27.08.2024
P. O. No. & Date :
Invoice No. & Date :
Supply Process Length Stamp of
Product Grade Tolerance Weight (MT)
Condition Route (Meter) Engineer
Annealed,
ROUND BARS SA479 Peeled
EIF-AOD - 1.350
1.85-2.55 k12/k10
TP316/316L CCM 2.680
And
1.650
polished
1.510
CHEMICAL COMPOSITION (%)
C Mn Si S P Cr NI MO N Size Pcs
Min. - - - - - 16.00 10.00 2.00
Max. 0.030 2.00 1.00 0.030 0.045 18.00 13.00 3.00
Heat No.
38L1368 0.019 1.49 0.42 0.010 0.041 17.70 10.30 2.43 14 MM 176
38L1324 0.012 1.50 0.39 0.008 0.039 17.74 10.26 2.41 20 MM 180
38L1236 0.014 1.52 0.41 0.010 0.043 17.56 10.45 2.44 16 MM 89
38L1267 0.016 1.58 0.45 0.012 0.037 17.62 10.36 2.51 40 MM 25
MECHANICAL TEST RESULT - Test Condition : Annealed
Tensile Impact, Joules
Elongation Charpy - 2 mm V Notch,
Proof Strength, Strength, Hardness
% Reduction Direction - Longitudinal
Parameter N/MM2 ASTM EN ISO Test Method :- EN ISO 148-1,
GL = 50 of Area %
A370:17a 6506-1 HBW Test Temperature-
MM
0.2% (Rp 0.2) N/MM2 I II III Average
SPEC 205 MIN 515 MIN 40 MIN 45 MIN 95 Max - - - -
10 MM 355 664 53.00 56.20 87-90 270 274 272 272
20 MM 361 652 51.80 60.50 90-93 271 275 276 274
16 MM 334 657 52.40 59.50 85-88 268 274 272 271.3
40 MM 341 660 53.60 57.20 88-91 273 271 268 270.66
METALLURGICAL TEST RESULT
JOMINY HARDENABILITY NON METALLIC INCLUSION RATING GRAIN
IS 3848 ASTM E45 MACRO TEST
SIZE
PARAMETER ASTM
DISTANCE A B C D ASTM
MM /INCH
J1 J2 J3 J4 TYPE E 381
T H T H T H T H E 112
RESULT HRC - - - - RESULT - - - - - - - - 4-5 C2R2S2
Remarks:
 Material is ultrasonically tested as per ASTM A388 & found satisfactory.
 The material is free from Radioactive & Mercury contaminations.
 Lead has not added during manufacturing.
 Material confirms the requirements as per ASTM A479/ASME SA479: 2017 Cond. A
For Laxcon Steels Limited.
We here by certify that above material described herein has been
manufactured and tested with satisfactory results in accordance with
the Specification & requirements
Authorized Signatory (Q.C.)