STRUCTURE : FILTER BUILDING

ITEM : TYPICAL FLOOR SLAB,PLATFORM SLAB

Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 1885 mm

2 Sorter clear span = 1770 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 1.06 Ton/m2

5 Support Condition = 6 Two long. edge disc.

8 A. DESIGN FORCES
9 Longer clear span 1885 <mm; m> 1.89
10 Sorter clear span 1770 <mm; m> 1.77

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 1.06 t/m2
19 Say 1.06 t/m2
21
22 Longer effective span LY = 1885+125 = 2010 <mm; m> 2.01

23 Sorter effective span Lx = 1770+125 = 1895 <mm; m> 1.90

24 Ly/Lx = 2010/1895 = 1.06

26
27 Shorter of the two spans (for use in bending moment calculations) 1895 <mm; m> 1.90

28
29 Refering IS-456, Table-22, P91 CASE 6 6 Two long. edge disc.

30 -ve support moment at continuous -My 0.000 = 0*1.06*1.9^2 = 0.00 tm

edge across long span
31 +ve moment at mid span across +My 0.040 = 0.04*1.06*1.9^2 = 0.15 tm
long span
32 -ve support moment at continuous -Mx 0.045 = 0.045*1.06*1.9^2 = 0.17 tm
edge across short span
33 +ve moment at mid span across +Mx 0.035 = 0.035*1.06*1.9^2 = 0.13 tm
short span
 ITEM : TYPICAL FLOOR SLAB,PLATFORM SLAB
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0*10000/125^2 = 0.00 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.15*10000/125^2 = 0.15 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.17*10000/125^2 = 0.16 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.13*10000/125^2 = 0.13 N/mm2

40
41 Max. Mu/bd2 Max. of (0:0.13) 0.16 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.15 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.16 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.13 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.146%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,PLATFORM SLAB
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 237.9
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 2.00
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 2*26 = 52.00
85 Actual 'Span' to 'Depth' ratio = 1770/125 = 14.16
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 275 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 1770
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 1885

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.
A B C D E F G H
7
8 A. DESIGN FORCES
9 clear span 1500 3365 1.50
11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 160 <mm; 0.160
as analysed hereunder.) m>
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm
Facor of safety 1.5 mm
minimum slab thkness 120 mm
Permissible Mu/bd2 2.76
Grade of Steel Fe 500
13 OK,More than the min. as per tender.
14 900 MM HIGH PARAPET WALL COSIDERED AT EDGE 0.207 t/m

15 900 mm High
16 The least effective depth in shorter / longer direction = 160-20 -10/2 = 135 <mm; 13.5
cm>
17
18 Total design UDL 1.06 t/m2
19 Say 1.06 t/m2
20
21
22 Longer effective span LY 1500.00 1500 <mm; 1.50
m>
28

29 Cantilever slab
30 Moment At Support -My 0.500 (0.5*1.06*1.5^2+0.207*1.5) 1.50 tm/m

34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support = 1.5*1.5*10000/135^2 = 1.24 N/mm2
43
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*13.5*100 = 1.62 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49 Reqd
50 For -ve moment i.e. top reinf. across 1.24 0.301 = 0.301*13.5/10 = 4.06 cm2/m
long span
54
55 Main Reinforcements F spacing Provided
56 At top across long span 10 100 = pi/4*(10/10)^2*1000/100 = 7.86 cm2/m 0.582%

60 Max. % steel = 0.582%

 ITEM : TYPICAL FLOOR SLAB,
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.
A B C D E F G H
61
62 Max. permissible spacing 3xd 405
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 100
66 OK
67
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*13.5*100 = 1.62 cm2/m
71 Provide 8 200 = pi/4*(8/10)^2*1000/200 = 2.51 cm2/m
72 Max. permissible spacing 5xd 675
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 200
76 OK
77
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 149.88
83 Multiplication factor corresponding to steel service stress of 0.582% steel from Fig. 4, Pg. 38; 1.78
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 7*1.78 = 12.48
85 Actual 'Span' to 'Depth' ratio = 1500/135 = 11.11
86 OK from deflection considerations.
88 D. SKETCH
89
90 10dia @ 100 c/c (T)
91
92
93
94 Short Span = 1500
95
96
97
98

99
100 Continuous Edge
101
102 All distribution rebars = 8dia @ 200 c/c
103
104
105
160
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FSS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 3805 mm

2 Sorter clear span = 2115 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 1.6 Ton/m2

5 Support Condition = 4 Two adjacent edge disc.

8 A. DESIGN FORCES
9 Longer clear span 3805 <mm; m> 3.81
10 Sorter clear span 2115 <mm; m> 2.12

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 1.60 t/m2
19 Say 1.60 t/m2
21
22 Longer effective span LY = 3805+125 = 3930 <mm; m> 3.93

23 Sorter effective span Lx = 2115+125 = 2240 <mm; m> 2.24

24 Ly/Lx = 3930/2240 = 1.75

26
27 Shorter of the two spans (for use in bending moment calculations) 2240 <mm; m> 2.24

28
29 Refering IS-456, Table-22, P91 CASE 4 4 Two adjacent edge disc.

30 -ve support moment at continuous -My 0.084 = 0.084*1.6*2.24^2 = 0.67 tm

edge across long span
31 +ve moment at mid span across +My 0.063 = 0.063*1.6*2.24^2 = 0.51 tm
long span
32 -ve support moment at continuous -Mx 0.047 = 0.047*1.6*2.24^2 = 0.38 tm
edge across short span
33 +ve moment at mid span across +Mx 0.035 = 0.035*1.6*2.24^2 = 0.28 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FSS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.67*10000/125^2 = 0.65 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.51*10000/125^2 = 0.49 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.38*10000/125^2 = 0.36 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.28*10000/125^2 = 0.27 N/mm2

40
41 Max. Mu/bd2 Max. of (0.65:0.27) 0.65 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.65 0.152 = 0.152*12.5/10 = 1.90 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.49 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.36 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.27 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m 0.161%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.161%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FSS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 237.9
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 2.00
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 2*26 = 52.00
85 Actual 'Span' to 'Depth' ratio = 2115/125 = 16.92
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 250 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 2115
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 3805

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FSS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6005 mm

2 Sorter clear span = 3865 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 1.6 Ton/m2

5 Support Condition = 5 Two short edge disc.

8 A. DESIGN FORCES
9 Longer clear span 6005 <mm; m> 6.01
10 Sorter clear span 3865 <mm; m> 3.87

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 1.60 t/m2
19 Say 1.60 t/m2
21
22 Longer effective span LY = 6005+125 = 6130 <mm; m> 6.13

23 Sorter effective span Lx = 3865+125 = 3990 <mm; m> 3.99

24 Ly/Lx = 6130/3990 = 1.54

26
27 Shorter of the two spans (for use in bending moment calculations) 3990 <mm; m> 3.99

28
29 Refering IS-456, Table-22, P91 CASE 5 5 Two short edge disc.

30 -ve support moment at continuous -My 0.061 = 0.061*1.6*3.99^2 = 1.55 tm

edge across long span
31 +ve moment at mid span across +My 0.046 = 0.046*1.6*3.99^2 = 1.16 tm
long span
32 -ve support moment at continuous -Mx 0.000 = 0*1.6*3.99^2 = 0.00 tm
edge across short span
33 +ve moment at mid span across +Mx 0.035 = 0.035*1.6*3.99^2 = 0.89 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FSS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*1.55*10000/125^2 = 1.49 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*1.16*10000/125^2 = 1.12 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0*10000/125^2 = 0.00 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.89*10000/125^2 = 0.86 N/mm2

40
41 Max. Mu/bd2 Max. of (1.49:0.86) 1.49 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 1.49 0.367 = 0.367*12.5/10 = 4.59 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 1.12 0.270 = 0.27*12.5/10 = 3.37 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.86 0.204 = 0.204*12.5/10 = 2.55 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 100 = pi/4*(8/10)^2*1000/100 = 5.03 cm2/m 0.402%

57 At bottom across long span 8 125 = pi/4*(8/10)^2*1000/125 = 4.02 cm2/m 0.322%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 175 = pi/4*(8/10)^2*1000/175 = 2.87 cm2/m 0.23%

60 Max. % steel = 0.402%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FSS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 242.9
Multiplication factor corresponding to steel service stress of 0.322% steel from Fig. 4, Pg. 38; 1.43
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.43*26 = 37.16
85 Actual 'Span' to 'Depth' ratio = 3865/125 = 30.92
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 100 c/c (T)

91
92
8dia @
125c/c (B)

93 Continuous Edge
94 Short Span = 3865
95 8dia @ 275 c/c (T)
96 8dia @ 175 c/c (B)
97

98

99 Long span = 6005

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
FS2
Floor Slab

CALCULATION OF B.M IN SLAB

0.078 0.102 Wl2

0.046
0.078 *Wl2
l= 1.8 M
w = 1.6 t/sqm

Moment at ist Support = 0.5288 t-m/m

Moment at 1st Span = 0.404 t-m/m

Moment at int Support = 0.4044 t-m/m

Moment at int Span = 0.238 t-m/m

Depth of slab = 150 mm

Effective Depth = 125 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For -ve moment i.e. top reinf. 1st 0.51 0.120 150.00 cm2/m 0.12
supp (0.12*1000*125)/100)
For +ve moment 1st span 0.39 0.120 150.00 cm2/m 0.12
(0.12*1000*)/100)
For -ve moment i.e. top reinf. int 0.39 0.120 150.00 cm /m2
0.12
supp (0.12*1000*)/100)
For +ve moment int span 0.23 0.120 (0.12*1000*)/100) 150.00 cm2/m 0.12

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm2/m 0.201 1%
supp
For +ve moment 1st span 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm2/m 0.201 1%
For -ve moment i.e. top reinf. int 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm /m2
0.201 1%
supp
For +ve moment intspan 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm2/m 0.201 1%

0.201

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 173.01
Multiplication factor corresponding to steel service stress of 0.201% steel from Fig. 4, Pg. 2.00
38; IS:456 Modified applicable ratio assuming 'Discontinuous' = 26*2 = 52.00
Actual 'Span' to 'Depth' ratio = 1800/125 = 14.40
OK from deflection considerations.
Single Span

span 1800

0.125

load 1.6 t/sqm

Moment at 1st Span = 0.648 t-m/m

Depth of slab = 150 mm

Effective Depth = 125 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For +ve moment 1st span 0.62 0.147 (0.1468*1000*125)/100) 183.50 cm2/m 0.147

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm2/m 0.201 1%
supp

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 211.65

Multiplication factor corresponding to steel service stress of 0.201% steel from Fig. 4, Pg. 2.00
Modified applicable ratio assuming 'Discontinuous' = 20*2 = 40.00
Actual 'Span' to 'Depth' ratio = 1800/125 = 14.40
OK from deflection considerations.
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FSS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6005 mm

2 Sorter clear span = 3770 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 1.6 Ton/m2

5 Support Condition = 7 Three edge disc.(one

Long edge cont.)

8 A. DESIGN FORCES
9 Longer clear span 6005 <mm; m> 6.01
10 Sorter clear span 3770 <mm; m> 3.77

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 1.60 t/m2
19 Say 1.60 t/m2
21
22 Longer effective span LY = 6005+125 = 6130 <mm; m> 6.13

23 Sorter effective span Lx = 3770+125 = 3895 <mm; m> 3.90

24 Ly/Lx = 6130/3895 = 1.57

26
27 Shorter of the two spans (for use in bending moment calculations) 3895 <mm; m> 3.90

28
29 Refering IS-456, Table-22, P91 CASE 7 7 Three edge disc.(one
Long edge cont.)

30 -ve support moment at continuous -My 0.086 = 0.086*1.6*3.9^2 = 2.09 tm

edge across long span
31 +ve moment at mid span across +My 0.065 = 0.065*1.6*3.9^2 = 1.59 tm
long span
32 -ve support moment at continuous -Mx 0.000 = 0*1.6*3.9^2 = 0.00 tm
edge across short span
33 +ve moment at mid span across +Mx 0.043 = 0.043*1.6*3.9^2 = 1.04 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FSS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*2.09*10000/125^2 = 2.00 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*1.59*10000/125^2 = 1.52 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0*10000/125^2 = 0.00 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*1.04*10000/125^2 = 1.00 N/mm2

40
41 Max. Mu/bd2 Max. of (2:1) 2.00 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 2.00 0.513 = 0.513*12.5/10 = 6.41 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 1.52 0.379 = 0.379*12.5/10 = 4.73 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 1.00 0.242 = 0.242*12.5/10 = 3.03 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 10 100 = pi/4*(10/10)^2*1000/100 = 7.86 cm2/m 0.629%

57 At bottom across long span 8 100 = pi/4*(8/10)^2*1000/100 = 5.03 cm2/m 0.402%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 150 = pi/4*(8/10)^2*1000/150 = 3.35 cm2/m 0.268%

60 Max. % steel = 0.629%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FSS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 272.9
Multiplication factor corresponding to steel service stress of 0.402% steel from Fig. 4, Pg. 38; 1.17
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.17*26 = 30.36
85 Actual 'Span' to 'Depth' ratio = 3770/125 = 30.16
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 10dia @ 100 c/c (T)

91
92
8dia @
100c/c (B)

93 Continuous Edge
94 Short Span = 3770
95 8dia @ 275 c/c (T)
96 8dia @ 150 c/c (B)
97

98

99 Long span = 6005

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FS5
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6200 mm

2 Sorter clear span = 3085 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 1 Interior panel

8 A. DESIGN FORCES
9 Longer clear span 6200 <mm; m> 6.20
10 Sorter clear span 3085 <mm; m> 3.09

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 6200+125 = 6325 <mm; m> 6.33

23 Sorter effective span Lx = 3085+125 = 3210 <mm; m> 3.21

24 Ly/Lx = 6325/3210 = 1.97

26
27 Shorter of the two spans (for use in bending moment calculations) 3210 <mm; m> 3.21

28
29 Refering IS-456, Table-22, P91 CASE 1 1 Interior panel

30 -ve support moment at continuous -My 0.064 = 0.064*0.95*3.21^2 = 0.63 tm

edge across long span
31 +ve moment at mid span across +My 0.049 = 0.049*0.95*3.21^2 = 0.47 tm
long span
32 -ve support moment at continuous -Mx 0.032 = 0.032*0.95*3.21^2 = 0.31 tm
edge across short span
33 +ve moment at mid span across +Mx 0.024 = 0.024*0.95*3.21^2 = 0.23 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FS5
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.63*10000/125^2 = 0.61 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.47*10000/125^2 = 0.46 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.31*10000/125^2 = 0.30 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.23*10000/125^2 = 0.23 N/mm2

40
41 Max. Mu/bd2 Max. of (0.61:0.23) 0.61 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.61 0.142 = 0.142*12.5/10 = 1.78 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.46 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.30 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.23 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.146%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FS5
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 237.9
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 2.00
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 2*26 = 52.00
85 Actual 'Span' to 'Depth' ratio = 3085/125 = 24.68
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 275 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 3085
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 6200

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FS4
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6200 mm

2 Sorter clear span = 3085 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 3 one long edge disc.

8 A. DESIGN FORCES
9 Longer clear span 6200 <mm; m> 6.20
10 Sorter clear span 3085 <mm; m> 3.09

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 6200+125 = 6325 <mm; m> 6.33

23 Sorter effective span Lx = 3085+125 = 3210 <mm; m> 3.21

24 Ly/Lx = 6325/3210 = 1.97

26
27 Shorter of the two spans (for use in bending moment calculations) 3210 <mm; m> 3.21

28
29 Refering IS-456, Table-22, P91 CASE 3 3 one long edge disc.

30 -ve support moment at continuous -My 0.084 = 0.084*0.95*3.21^2 = 0.82 tm

edge across long span
31 +ve moment at mid span across +My 0.064 = 0.064*0.95*3.21^2 = 0.63 tm
long span
32 -ve support moment at continuous -Mx 0.037 = 0.037*0.95*3.21^2 = 0.36 tm
edge across short span
33 +ve moment at mid span across +Mx 0.028 = 0.028*0.95*3.21^2 = 0.27 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FS4
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.82*10000/125^2 = 0.79 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.63*10000/125^2 = 0.60 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.36*10000/125^2 = 0.35 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.27*10000/125^2 = 0.26 N/mm2

40
41 Max. Mu/bd2 Max. of (0.79:0.26) 0.79 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.79 0.186 = 0.186*12.5/10 = 2.33 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.60 0.142 = 0.142*12.5/10 = 1.78 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.35 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.26 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 200 = pi/4*(8/10)^2*1000/200 = 2.51 cm2/m 0.201%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.201%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FS4
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 281.5
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 1.64
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.64*26 = 42.68
85 Actual 'Span' to 'Depth' ratio = 3085/125 = 24.68
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 200 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 3085
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 6200

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
FS2
Floor Slab

CALCULATION OF B.M IN SLAB

0.078 0.102 Wl2

0.046
0.078 *Wl2
l= 1.2 M
w = 0.95 t/sqm

Moment at ist Support = 0.1395 t-m/m

Moment at 1st Span = 0.107 t-m/m

Moment at int Support = 0.1067 t-m/m

Moment at int Span = 0.063 t-m/m

Depth of slab = 150 mm

Effective Depth = 125 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For -ve moment i.e. top reinf. 1st 0.13 0.120 150.00 cm2/m 0.12
supp (0.12*1000*125)/100)
For +ve moment 1st span 0.10 0.120 150.00 cm2/m 0.12
(0.12*1000*)/100)
For -ve moment i.e. top reinf. int 0.10 0.120 150.00 cm /m2
0.12
supp (0.12*1000*)/100)
For +ve moment int span 0.06 0.120 (0.12*1000*)/100) 150.00 cm2/m 0.12

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%
supp
For +ve moment 1st span 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%
For -ve moment i.e. top reinf. int 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm /m2
0.146 1%
supp
For +ve moment intspan 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%

0.146

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 237.89
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 2.00
38; IS:456 Modified applicable ratio assuming 'Discontinuous' = 26*2 = 52.00
Actual 'Span' to 'Depth' ratio = 1200/125 = 9.60
OK from deflection considerations.
Single Span

span 1200

0.125

load 0.95 t/sqm

Moment at 1st Span = 0.171 t-m/m

Depth of slab = 150 mm

Effective Depth = 125 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For +ve moment 1st span 0.16 0.120 (0.12*1000*125)/100) 150.00 cm2/m 0.120

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%
supp

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 237.89

Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 2.00
Modified applicable ratio assuming 'Discontinuous' = 20*2 = 40.00
Actual 'Span' to 'Depth' ratio = 1200/125 = 9.60
OK from deflection considerations.
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 4000 mm

2 Sorter clear span = 3085 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 2 one short edge disc.

8 A. DESIGN FORCES
9 Longer clear span 4000 <mm; m> 4.00
10 Sorter clear span 3085 <mm; m> 3.09

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 4000+125 = 4125 <mm; m> 4.13

23 Sorter effective span Lx = 3085+125 = 3210 <mm; m> 3.21

24 Ly/Lx = 4125/3210 = 1.29

26
27 Shorter of the two spans (for use in bending moment calculations) 3210 <mm; m> 3.21

28
29 Refering IS-456, Table-22, P91 CASE 2 2 one short edge disc.

30 -ve support moment at continuous -My 0.051 = 0.051*0.95*3.21^2 = 0.50 tm

edge across long span
31 +ve moment at mid span across +My 0.039 = 0.039*0.95*3.21^2 = 0.38 tm
long span
32 -ve support moment at continuous -Mx 0.037 = 0.037*0.95*3.21^2 = 0.36 tm
edge across short span
33 +ve moment at mid span across +Mx 0.028 = 0.028*0.95*3.21^2 = 0.27 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.5*10000/125^2 = 0.48 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.38*10000/125^2 = 0.36 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.36*10000/125^2 = 0.35 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.27*10000/125^2 = 0.26 N/mm2

40
41 Max. Mu/bd2 Max. of (0.48:0.26) 0.48 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.48 0.120 = 0.12*12.5/10 = 1.50 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.36 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.35 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.26 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.146%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 237.9
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 2.00
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 2*26 = 52.00
85 Actual 'Span' to 'Depth' ratio = 3085/125 = 24.68
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 275 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 3085
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 4000

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,FS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 4000 mm

2 Sorter clear span = 3085 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 4 Two adjacent edge disc.

8 A. DESIGN FORCES
9 Longer clear span 4000 <mm; m> 4.00
10 Sorter clear span 3085 <mm; m> 3.09

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 4000+125 = 4125 <mm; m> 4.13

23 Sorter effective span Lx = 3085+125 = 3210 <mm; m> 3.21

24 Ly/Lx = 4125/3210 = 1.29

26
27 Shorter of the two spans (for use in bending moment calculations) 3210 <mm; m> 3.21

28
29 Refering IS-456, Table-22, P91 CASE 4 4 Two adjacent edge disc.

30 -ve support moment at continuous -My 0.065 = 0.065*0.95*3.21^2 = 0.63 tm

edge across long span
31 +ve moment at mid span across +My 0.049 = 0.049*0.95*3.21^2 = 0.48 tm
long span
32 -ve support moment at continuous -Mx 0.047 = 0.047*0.95*3.21^2 = 0.46 tm
edge across short span
33 +ve moment at mid span across +Mx 0.035 = 0.035*0.95*3.21^2 = 0.34 tm
short span
 ITEM : TYPICAL FLOOR SLAB,FS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.63*10000/125^2 = 0.61 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.48*10000/125^2 = 0.46 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.46*10000/125^2 = 0.44 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.34*10000/125^2 = 0.33 N/mm2

40
41 Max. Mu/bd2 Max. of (0.61:0.33) 0.61 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.61 0.142 = 0.142*12.5/10 = 1.78 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.46 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.44 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.33 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.146%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,FS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 237.9
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 2.00
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 2*26 = 52.00
85 Actual 'Span' to 'Depth' ratio = 3085/125 = 24.68
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 275 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 3085
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 4000

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,MS
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 4260 mm

2 Sorter clear span = 3840 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 9 Four edge disc.

8 A. DESIGN FORCES
9 Longer clear span 4260 <mm; m> 4.26
10 Sorter clear span 3840 <mm; m> 3.84

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 4260+125 = 4385 <mm; m> 4.39

23 Sorter effective span Lx = 3840+125 = 3965 <mm; m> 3.97

24 Ly/Lx = 4385/3965 = 1.11

26
27 Shorter of the two spans (for use in bending moment calculations) 3965 <mm; m> 3.97

28
29 Refering IS-456, Table-22, P91 CASE 9 9 Four edge disc.

30 -ve support moment at continuous -My 0.000 = 0*0.95*3.97^2 = 0.00 tm

edge across long span
31 +ve moment at mid span across +My 0.065 = 0.065*0.95*3.97^2 = 0.97 tm
long span
32 -ve support moment at continuous -Mx 0.000 = 0*0.95*3.97^2 = 0.00 tm
edge across short span
33 +ve moment at mid span across +Mx 0.056 = 0.056*0.95*3.97^2 = 0.84 tm
short span
 ITEM : TYPICAL FLOOR SLAB,MS
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0*10000/125^2 = 0.00 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.97*10000/125^2 = 0.93 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0*10000/125^2 = 0.00 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.84*10000/125^2 = 0.80 N/mm2

40
41 Max. Mu/bd2 Max. of (0:0.8) 0.93 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.93 0.221 = 0.221*12.5/10 = 2.77 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.80 0.191 = 0.191*12.5/10 = 2.39 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

57 At bottom across long span 8 175 = pi/4*(8/10)^2*1000/175 = 2.87 cm2/m 0.23%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 175 = pi/4*(8/10)^2*1000/175 = 2.87 cm2/m 0.23%

60 Max. % steel = 0.23%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,MS
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 279.1
Multiplication factor corresponding to steel service stress of 0.23% steel from Fig. 4, Pg. 38; 1.38
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.38*26 = 35.88
85 Actual 'Span' to 'Depth' ratio = 3840/125 = 30.72
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 275 c/c (T)

91
92
8dia @
175c/c (B)

93 Continuous Edge
94 Short Span = 3840
95 8dia @ 275 c/c (T)
96 8dia @ 175 c/c (B)
97

98

99 Long span = 4260

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,RS4
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 3805 mm

2 Sorter clear span = 2110 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 4 Two adjacent edge disc.

8 A. DESIGN FORCES
9 Longer clear span 3805 <mm; m> 3.81
10 Sorter clear span 2110 <mm; m> 2.11

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 3805+125 = 3930 <mm; m> 3.93

23 Sorter effective span Lx = 2110+125 = 2235 <mm; m> 2.24

24 Ly/Lx = 3930/2235 = 1.76

26
27 Shorter of the two spans (for use in bending moment calculations) 2235 <mm; m> 2.24

28
29 Refering IS-456, Table-22, P91 CASE 4 4 Two adjacent edge disc.

30 -ve support moment at continuous -My 0.084 = 0.084*0.95*2.24^2 = 0.40 tm

edge across long span
31 +ve moment at mid span across +My 0.063 = 0.063*0.95*2.24^2 = 0.30 tm
long span
32 -ve support moment at continuous -Mx 0.047 = 0.047*0.95*2.24^2 = 0.22 tm
edge across short span
33 +ve moment at mid span across +Mx 0.035 = 0.035*0.95*2.24^2 = 0.17 tm
short span
 ITEM : TYPICAL FLOOR SLAB,RS4
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.4*10000/125^2 = 0.38 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.3*10000/125^2 = 0.29 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0.22*10000/125^2 = 0.21 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.17*10000/125^2 = 0.16 N/mm2

40
41 Max. Mu/bd2 Max. of (0.38:0.16) 0.38 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.38 0.120 = 0.12*12.5/10 = 1.50 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.29 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.21 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.16 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

57 At bottom across long span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.146%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,RS4
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 237.9
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 38; 2.00
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 2*26 = 52.00
85 Actual 'Span' to 'Depth' ratio = 2110/125 = 16.88
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 275 c/c (T)

91
92
8dia @
275c/c (B)

93 Continuous Edge
94 Short Span = 2110
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 3805

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,RS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6005 mm

2 Sorter clear span = 3855 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 5 Two short edge disc.

8 A. DESIGN FORCES
9 Longer clear span 6005 <mm; m> 6.01
10 Sorter clear span 3855 <mm; m> 3.86

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 6005+125 = 6130 <mm; m> 6.13

23 Sorter effective span Lx = 3855+125 = 3980 <mm; m> 3.98

24 Ly/Lx = 6130/3980 = 1.54

26
27 Shorter of the two spans (for use in bending moment calculations) 3980 <mm; m> 3.98

28
29 Refering IS-456, Table-22, P91 CASE 5 5 Two short edge disc.

30 -ve support moment at continuous -My 0.061 = 0.061*0.95*3.98^2 = 0.91 tm

edge across long span
31 +ve moment at mid span across +My 0.046 = 0.046*0.95*3.98^2 = 0.69 tm
long span
32 -ve support moment at continuous -Mx 0.000 = 0*0.95*3.98^2 = 0.00 tm
edge across short span
33 +ve moment at mid span across +Mx 0.035 = 0.035*0.95*3.98^2 = 0.53 tm
short span
 ITEM : TYPICAL FLOOR SLAB,RS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*0.91*10000/125^2 = 0.88 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.69*10000/125^2 = 0.66 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0*10000/125^2 = 0.00 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.53*10000/125^2 = 0.51 N/mm2

40
41 Max. Mu/bd2 Max. of (0.88:0.51) 0.88 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 0.88 0.209 = 0.209*12.5/10 = 2.61 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.66 0.154 = 0.154*12.5/10 = 1.93 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.51 0.120 = 0.12*12.5/10 = 1.50 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 175 = pi/4*(8/10)^2*1000/175 = 2.87 cm2/m 0.23%

57 At bottom across long span 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m 0.161%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.23%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,RS3
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 277.5
Multiplication factor corresponding to steel service stress of 0.161% steel from Fig. 4, Pg. 38; 1.61
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.61*26 = 41.74
85 Actual 'Span' to 'Depth' ratio = 3855/125 = 30.84
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 175 c/c (T)

91
92
8dia @
250c/c (B)

93 Continuous Edge
94 Short Span = 3855
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 6005

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
RS2
Floor Slab

CALCULATION OF B.M IN SLAB

0.078 0.102 Wl2

0.046
0.078 *Wl2
l= 1.76 M
w = 0.95 t/sqm

Moment at ist Support = 0.3002 t-m/m

Moment at 1st Span = 0.230 t-m/m

Moment at int Support = 0.2295 t-m/m

Moment at int Span = 0.135 t-m/m

Depth of slab = 150 mm

Effective Depth = 125 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For -ve moment i.e. top reinf. 1st 0.29 0.120 150.00 cm2/m 0.12
supp (0.12*1000*125)/100)
For +ve moment 1st span 0.22 0.120 150.00 cm2/m 0.12
(0.12*1000*)/100)
For -ve moment i.e. top reinf. int 0.22 0.120 150.00 cm /m2
0.12
supp (0.12*1000*)/100)
For +ve moment int span 0.13 0.120 (0.12*1000*)/100) 150.00 cm2/m 0.12

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%
supp
For +ve moment 1st span 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%
For -ve moment i.e. top reinf. int 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm /m2
0.146 1%
supp
For +ve moment intspan 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%

0.146

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 237.89
Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 2.00
38; IS:456 Modified applicable ratio assuming 'Discontinuous' = 26*2 = 52.00
Actual 'Span' to 'Depth' ratio = 1760/125 = 14.08
OK from deflection considerations.
Single Span

span 1760

0.125

load 0.95 t/sqm

Moment at 1st Span = 0.368 t-m/m

Depth of slab = 150 mm

Effective Depth = 125 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For +ve moment 1st span 0.35 0.120 (0.12*1000*125)/100) 150.00 cm2/m 0.120

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 275 = pi/4*(8/10)^2*1000/275 = 182.86 cm2/m 0.146 1%
supp

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 237.89

Multiplication factor corresponding to steel service stress of 0.146% steel from Fig. 4, Pg. 2.00
Modified applicable ratio assuming 'Discontinuous' = 20*2 = 40.00
Actual 'Span' to 'Depth' ratio = 1760/125 = 14.08
OK from deflection considerations.
 STRUCTURE : FILTER BUILDING
ITEM : TYPICAL FLOOR SLAB,RS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6005 mm

2 Sorter clear span = 3770 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.95 Ton/m2

5 Support Condition = 7 Three edge disc.(one

Long edge cont.)

8 A. DESIGN FORCES
9 Longer clear span 6005 <mm; m> 6.01
10 Sorter clear span 3770 <mm; m> 3.77

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
21
22 Longer effective span LY = 6005+125 = 6130 <mm; m> 6.13

23 Sorter effective span Lx = 3770+125 = 3895 <mm; m> 3.90

24 Ly/Lx = 6130/3895 = 1.57

26
27 Shorter of the two spans (for use in bending moment calculations) 3895 <mm; m> 3.90

28
29 Refering IS-456, Table-22, P91 CASE 7 7 Three edge disc.(one
Long edge cont.)

30 -ve support moment at continuous -My 0.086 = 0.086*0.95*3.9^2 = 1.24 tm

edge across long span
31 +ve moment at mid span across +My 0.065 = 0.065*0.95*3.9^2 = 0.94 tm
long span
32 -ve support moment at continuous -Mx 0.000 = 0*0.95*3.9^2 = 0.00 tm
edge across short span
33 +ve moment at mid span across +Mx 0.043 = 0.043*0.95*3.9^2 = 0.62 tm
short span
 ITEM : TYPICAL FLOOR SLAB,RS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*1.24*10000/125^2 = 1.19 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*0.94*10000/125^2 = 0.90 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0*10000/125^2 = 0.00 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.62*10000/125^2 = 0.59 N/mm2

40
41 Max. Mu/bd2 Max. of (1.19:0.59) 1.19 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 1.19 0.288 = 0.288*12.5/10 = 3.60 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 0.90 0.216 = 0.216*12.5/10 = 2.70 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.59 0.140 = 0.14*12.5/10 = 1.75 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 8 125 = pi/4*(8/10)^2*1000/125 = 4.02 cm2/m 0.322%

57 At bottom across long span 8 175 = pi/4*(8/10)^2*1000/175 = 2.87 cm2/m 0.23%

58 At top across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

59 At bottom across short span 8 275 = pi/4*(8/10)^2*1000/275 = 1.83 cm2/m 0.146%

60 Max. % steel = 0.322%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 275
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,RS1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 272.5
Multiplication factor corresponding to steel service stress of 0.23% steel from Fig. 4, Pg. 38; 1.42
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.42*26 = 36.96
85 Actual 'Span' to 'Depth' ratio = 3770/125 = 30.16
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 8dia @ 125 c/c (T)

91
92
8dia @
175c/c (B)

93 Continuous Edge
94 Short Span = 3770
95 8dia @ 275 c/c (T)
96 8dia @ 275 c/c (B)
97

98

99 Long span = 6005

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 STRUCTURE : SUBSTATION BUILDING
ITEM : TYPICAL FLOOR SLAB,S1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
1 Longer clear span = 6450 mm

2 Sorter clear span = 4350 mm

3 Thickness of Slab = 150 mm

4 Total UDL. = 0.85 Ton/m2

5 Support Condition = 7 Three edge disc.(one

Long edge cont.)

8 A. DESIGN FORCES
9 Longer clear span 6450 <mm; m> 6.45
10 Sorter clear span 4350 <mm; m> 4.35

11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 150 mm <mm; m> 0.150
as analysed hereunder.)
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm

Facor of safety 1.5 mm

minimum slab thkness 110 mm
Permissible Mu/bd2 2.76
13 OK,More than the min. as per tender.
14 OK, From max. Mu/bd2 considerations as detailed hereunder.
15 OK from deflection considerations as checked hereunder.
16 The least effective depth in shorter / longer direction = 150-20 -10/2 = 125 <mm; cm> 12.5
17
Total design UDL 0.85 t/m2
19 Say 0.85 t/m2
21
22 Longer effective span LY = 6450+125 = 6575 <mm; m> 6.58

23 Sorter effective span Lx = 4350+125 = 4475 <mm; m> 4.48

24 Ly/Lx = 6575/4475 = 1.47

26
27 Shorter of the two spans (for use in bending moment calculations) 4475 <mm; m> 4.48

28
29 Refering IS-456, Table-22, P91 CASE 7 7 Three edge disc.(one
Long edge cont.)

30 -ve support moment at continuous -My 0.083 = 0.083*0.85*4.48^2 = 1.41 tm

edge across long span
31 +ve moment at mid span across +My 0.063 = 0.063*0.85*4.48^2 = 1.07 tm
long span
32 -ve support moment at continuous -Mx 0.000 = 0*0.85*4.48^2 = 0.00 tm
edge across short span
33 +ve moment at mid span across +Mx 0.043 = 0.043*0.85*4.48^2 = 0.73 tm
short span
 ITEM : TYPICAL FLOOR SLAB,S1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support across long span = 1.5*1.41*10000/125^2 = 1.35 N/mm2
37 +ve Mu/bd2 at mid span across long span = 1.5*1.07*10000/125^2 = 1.03 N/mm2
38 -ve Mu/bd2 at support across short span = 1.5*0*10000/125^2 = 0.00 N/mm2
39 +ve Mu/bd2 at mid span across short span = 1.5*0.73*10000/125^2 = 0.70 N/mm2

40
41 Max. Mu/bd2 Max. of (1.35:0.7) 1.35 N/mm2
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49
50 For -ve moment i.e. top reinf. across 1.35 0.333 = 0.333*12.5/10 = 4.16 cm2/m
long span
51 For +ve moment i.e. bottom reinf. 1.03 0.247 = 0.247*12.5/10 = 3.09 cm2/m
across long span
52 For -ve moment i.e. top reinf. across 0.00 0.120 = 0.12*12.5/10 = 1.50 cm2/m
short span
53 For +ve moment i.e. bottom reinf. 0.70 0.167 = 0.167*12.5/10 = 2.09 cm2/m
across short span
54
55 Main Reinforcements F spacing
56 At top across long span 10 150 = pi/4*(10/10)^2*1000/150 = 5.24 cm2/m 0.419%

57 At bottom across long span 10 200 = pi/4*(10/10)^2*1000/200 = 3.93 cm2/m 0.314%

58 At top across short span 8 200 = pi/4*(8/10)^2*1000/200 = 2.51 cm2/m 0.201%

59 At bottom across short span 8 200 = pi/4*(8/10)^2*1000/200 = 2.51 cm2/m 0.201%

60 Max. % steel = 0.419%

62 Max. permissible spacing 3xd 375
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 200
66 OK
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*12.5*100 = 1.50 cm2/m
71 Provide 8 250 = pi/4*(8/10)^2*1000/250 = 2.01 cm2/m
72 Max. permissible spacing 5xd 625
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 250
76 OK
 ITEM : TYPICAL FLOOR SLAB,S1
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.

A B C D E F G H
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
83 fs = 0.58*Ast Reqd/Ast Pro 228.1
Multiplication factor corresponding to steel service stress of 0.314% steel from Fig. 4, Pg. 38; 1.55
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 1.55*26 = 40.31
85 Actual 'Span' to 'Depth' ratio = 4350/125 = 34.80
86 OK from deflection considerations.
87
88 D. SKETCH
89

90 10dia @ 150 c/c (T)

91
92
10dia @
200c/c (B)

93 Continuous Edge
94 Short Span = 4350
95 8dia @ 200 c/c (T)
96 8dia @ 200 c/c (B)
97

98

99 Long span = 6450

100 PLAN
101
102 All distribution rebars = 8dia @ 250 c/c
103
104
105
150
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
113
114
115
 Floor Slab

CALCULATION OF B.M IN SLAB

0.078 0.102 Wl2

0.046
0.078 *Wl2
l= 2 M
w = 0.85 t/sqm

Moment at ist Support = 0.3468 t-m/m

Moment at 1st Span = 0.265 t-m/m

Moment at int Support = 0.2652 t-m/m

Moment at int Span = 0.156 t-m/m

Depth of slab = 125 mm

Effective Depth = 100 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For -ve moment i.e. top reinf. 1st 0.52 0.123 122.80 cm2/m 0.1228
supp (0.1228*1000*100)/100)
For +ve moment 1st span 0.40 0.120 120.00 cm2/m 0.12
(0.12*1000*)/100)
For -ve moment i.e. top reinf. int 0.40 0.120 120.00 cm /m2
0.12
supp (0.12*1000*)/100)
For +ve moment int span 0.23 0.120 (0.12*1000*)/100) 120.00 cm2/m 0.12

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 150 = pi/4*(8/10)^2*1000/150 = 335.24 cm2/m 0.335 1%
supp
For +ve moment 1st span 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm2/m 0.251 1%
For -ve moment i.e. top reinf. int 8 150 = pi/4*(8/10)^2*1000/150 = 335.24 cm /m2
0.335 1%
supp
For +ve moment intspan 8 200 = pi/4*(8/10)^2*1000/200 = 251.43 cm2/m 0.251 1%

0.335

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 138.41
Multiplication factor corresponding to steel service stress of 0.251% steel from Fig. 4, Pg. 2.00
38; IS:456 Modified applicable ratio assuming 'Discontinuous' = 26*2 = 52.00
Actual 'Span' to 'Depth' ratio = 2000/100 = 20.00
OK from deflection considerations.
Single Span

span 3000

0.125

load 0.84 t/sqm

Moment at 1st Span = 0.945 t-m/m

Depth of slab = 135 mm

Effective Depth = 110 mm

Yield Stress of Reinf 500 n/mm2

Reinf as per Table-

2,Pg-48,SP-16
Reqd. reinf Mu/bd2 ptxd/10 Reqd %of Reinf

For +ve moment 1st span 1.17 0.285 (0.2852*1000*110)/100) 313.72 cm2/m 0.285

Main Reinforcements F spacing

For -ve moment i.e. top reinf. 1st 8 130 = pi/4*(8/10)^2*1000/130 = 386.81 cm2/m 0.352 1%
supp

C. DEFLECTION CHECK
Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
Cantilever 7
Simply supported 20
Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 235.20

Multiplication factor corresponding to steel service stress of 0.352% steel from Fig. 4, Pg. 1.43
Modified applicable ratio assuming 'Discontinuous' = 20*1.43 = 28.63
Actual 'Span' to 'Depth' ratio = 3000/110 = 27.27
OK from deflection considerations.
 STRUCTURE : SUBSTATION BUILDING
ITEM : TYPICAL FLOOR SLAB,S7
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.
A B C D E F G H
7
8 A. DESIGN FORCES
9 clear span 2000 3365 2.00
11
12 Assumed thickness of slab t (By trial & error till OK for various requirements 200 <mm; 0.200
as analysed hereunder.) m>
Clear cover to main reinf 20 mm
Maximum diameter of bar 10 mm
Facor of safety 1.5 mm
minimum slab thkness 120 mm
Permissible Mu/bd2 2.76
Grade of Steel Fe 500
13 OK,More than the min. as per tender.
14 900 MM HIGH PARAPET WALL COSIDERED AT EDGE 0.207 t/m

15 900 mm High
16 The least effective depth in shorter / longer direction = 200-20 -10/2 = 175 <mm; 17.5
cm>
17
18 Total design UDL 0.95 t/m2
19 Say 0.95 t/m2
20
21
22 Longer effective span LY 2000.00 2000 <mm; 2.00
m>
28

29 Cantilever slab
30 Moment At Support -My 0.500 (0.5*0.95*2^2+0.207*2) 2.31 tm/m
34
35 B. REINFORCEMENTS
36 -ve Mu/bd2 at support = 1.5*2.31*10000/175^2 = 1.13 N/mm2
43
44 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
45 0.12 % = 0.0012*17.5*100 = 2.10 cm2/m
46
47 Reinf as per
Table-2,Pg-
48,SP-16
48 Reqd. reinf Mu/bd2 ptxd/10
49 Reqd
50 For -ve moment i.e. top reinf. across 1.13 0.275 = 0.275*17.5/10 = 4.81 cm2/m
long span
54
55 Main Reinforcements F spacing Provided
56 At top across long span 10 100 = pi/4*(10/10)^2*1000/100 = 7.86 cm2/m 0.449%

60 Max. % steel = 0.449%

 ITEM : TYPICAL FLOOR SLAB,S7
Sl. ITEM NOTN. FORMULA CALCULATIONS VALUE UNIT REMARKS
No.
A B C D E F G H
61
62 Max. permissible spacing 3xd 525
(As per Cl. 26.3.3; Pg. 46; IS:456)
63 or 300
64 Least of the two 300
65 Max. provided spacing 100
66 OK
67
68 Distribution Reinforcement
69 Min. reinf. in each direction - as per Cl. 26.5.2.1; Pg. 48; IS:456
70 0.12 % = 0.0012*17.5*100 = 2.10 cm2/m
71 Provide 8 200 = pi/4*(8/10)^2*1000/200 = 2.51 cm2/m
72 Max. permissible spacing 5xd 875
(As per Cl. 26.3.3; Pg. 46; IS:456)
73 or 450
74 Least of the two 450
75 Max. provided spacing 200
76 OK
77
78 C. DEFLECTION CHECK
79 Permissible 'Span' to 'Depth' ratio (As per Cl. 23.2.1; Pg. 37; IS:456)
80 Cantilever 7
81 Simply supported 20
82 Continuous 26
fs = 0.58*Ast Reqd/Ast Pro 177.50
83 Multiplication factor corresponding to steel service stress of 0.449% steel from Fig. 4, Pg. 38; 1.73
84 IS:456 Modified applicable ratio assuming 'Discontinuous' = 7*1.73 = 12.09
85 Actual 'Span' to 'Depth' ratio = 2000/175 = 11.43
86 OK from deflection considerations.
88 D. SKETCH
89
90 10dia @ 100 c/c (T)
91
92
93
94 Short Span = 2000
95
96
97
98

99
100 Continuous Edge
101
102 All distribution rebars = 8dia @ 200 c/c
103
104
105
200
106
107
108 SECTION
109
110 Provided rebars on drawings may be the same or greater than the above design requirements.
111
112
TOWER-E,KARNAL Sh. 52/69

Pt M25 Mu/bd2(fck-25) fy-500

0 0.0001
0.16 0.0364
0.17 0.0388

0.18 0.0412
0.19 0.0436
0.2 0.046
0.21 0.0484
0.22 0.0508

0.23 0.0532
0.24 0.0556

0.25 0.058

0.26 0.0604

0.27 0.0628

0.28 0.0652
0.29 0.0676

0.15 0.29 0.3 0.07

0.16 0.297 0.31 0.0724
0.17 0.304 0.32 0.0748
0.18 0.311 0.33 0.0772
0.19 0.318 0.34 0.0796
0.20 0.325 0.35 0.082
0.21 0.332 0.36 0.0844
0.22 0.339 0.37 0.0868
0.23 0.346 0.38 0.0892
0.24 0.353 0.39 0.0916

0.25 0.36 0.4 0.094

0.26 0.3652 0.41 0.0964

0.27 0.3704 0.42 0.0988
0.28 0.3756 0.43 0.1012
0.29 0.3808 0.44 0.1036

0.3 0.386 0.45 0.106

0.31 0.3912 0.46 0.1084

0.32 0.3964 0.47 0.1108

0.33 0.4016 0.48 0.1132

0.34 0.4068 0.49 0.1156

0.35 0.412 0.5 0.118

0.36 0.4172 0.51 0.1204

0.37 0.4224 0.52 0.1228
0.38 0.4276 0.53 0.1252
0.39 0.4328 0.54 0.1276
0.40 0.4380 0.55 0.13
0.41 0.4432 0.56 0.1324

0.42 0.4484 0.57 0.1348

TOWER-E,KARNAL Sh. 53/69

0.17 0.0388

0.18 0.0412
0.19 0.0436
0.43 0.4536 0.58 0.1372
0.44 0.4588 0.59 0.1396
0.45 0.4640 0.6 0.142
0.46 0.4692 0.61 0.1444
0.47 0.4744 0.62 0.1468
0.48 0.4796 0.63 0.1492

0.49 0.4848 0.64 0.1516

0.50 0.4900 0.65 0.154
0.51 0.4932 0.66 0.1566
0.52 0.4964 0.67 0.1592
0.53 0.4996 0.68 0.1618
0.54 0.5028 0.69 0.1644
0.55 0.5060 0.7 0.167
0.56 0.5092 0.71 0.1696
0.57 0.5124 0.72 0.1722
0.58 0.5156 0.73 0.1748
0.59 0.5188 0.74 0.1774
0.60 0.5220 0.75 0.179
0.61 0.5252 0.76 0.1814
0.62 0.5284 0.77 0.1838

0.63 0.5316 0.78 0.1862

0.64 0.5348 0.79 0.1886

0.65 0.5380 0.8 0.191
0.66 0.5412 0.81 0.1936
0.67 0.5444 0.82 0.1962
0.68 0.5476 0.83 0.1988
0.69 0.5508 0.84 0.2014
0.70 0.5540 0.85 0.204
0.71 0.5572 0.86 0.2064
0.72 0.5604 0.87 0.2088

0.73 0.5636 0.88 0.2112

0.74 0.5668 0.89 0.2136
0.75 0.57 0.9 0.216
0.76 0.5728 0.91 0.2186
0.77 0.5756 0.92 0.2212
0.78 0.5784 0.93 0.2238
0.79 0.5812 0.94 0.2264
0.80 0.5840 0.95 0.229
0.81 0.5868 0.96 0.2316
0.82 0.5896 0.97 0.2342
0.83 0.5924 0.98 0.2368
0.84 0.5952 0.99 0.2394
0.85 0.5980 1 0.242
0.86 0.6008 1.01 0.2446
0.87 0.6036 1.02 0.2472
0.88 0.6064 1.03 0.2498

0.89 0.6092 1.04 0.2524

0.90 0.6120 1.05 0.255
TOWER-E,KARNAL Sh. 54/69

0.17 0.0388

0.18 0.0412
0.19 0.0436
0.91 0.6148 1.06 0.2574

0.92 0.6176 1.07 0.2598

0.93 0.6204 1.08 0.2622
0.94 0.6232 1.09 0.2646
0.95 0.6260 1.1 0.267
0.96 0.6288 1.11 0.2696
0.97 0.6316 1.12 0.2722
0.98 0.6344 1.13 0.2748
0.99 0.6372 1.14 0.2774

1 0.64 1.15 0.28

1.16 0.2826
1.17 0.2852
1.18 0.2878
1.19 0.2904
1.2 0.293
1.21 0.2956
1.22 0.2982
1.23 0.3008
1.24 0.3034
1.25 0.306
1.26 0.3088
1.27 0.3116
1.28 0.3144
1.29 0.3172
1.3 0.32
1.31 0.3226
1.32 0.3252
1.33 0.3278
1.34 0.3304
1.35 0.333
1.36 0.3356
1.37 0.3382
1.38 0.3408
1.39 0.3434
1.4 0.346
1.41 0.3486
1.42 0.3512
1.43 0.3538
1.44 0.3564
1.45 0.359
1.46 0.3618
1.47 0.3646
1.48 0.3674
1.49 0.3702
1.5 0.373
1.51 0.3758
1.52 0.3786
1.53 0.3814
1.54 0.3842
1.55 0.387
1.56 0.3896
1.57 0.3922
1.58 0.3948
1.59 0.3974
1.6 0.4
1.61 0.4028
1.62 0.4056
1.63 0.4084
1.64 0.4112
1.65 0.414
1.66 0.4168
1.67 0.4196
1.68 0.4224
1.69 0.4252
1.7 0.428
1.71 0.4308
1.72 0.4336
1.73 0.4364
1.74 0.4392
1.75 0.442
1.76 0.4448
1.77 0.4476
1.78 0.4504
1.79 0.4532
1.8 0.456
1.81 0.4588
TOWER-E,KARNAL Sh. 55/69

0.17 0.0388

0.18 0.0412
0.19 0.0436
1.82 0.4616
1.83 0.4644
1.84 0.4672
1.85 0.47
1.86 0.4728
1.87 0.4756
1.88 0.4784
1.89 0.4812
1.9 0.484
1.91 0.4868
1.92 0.4896
1.93 0.4924
1.94 0.4952
1.95 0.498
1.96 0.501
1.97 0.504
1.98 0.507
1.99 0.51
2 0.513
2.01 0.5158
2.02 0.5186
2.03 0.5214
2.04 0.5242
2.05 0.527
2.06 0.53
2.07 0.533
2.08 0.536
2.09 0.539
2.1 0.542
2.11 0.545
2.12 0.548
2.13 0.551
2.14 0.554
2.15 0.557
2.16 0.56
2.17 0.563
2.18 0.566
2.19 0.569
2.2 0.572
2.21 0.575
2.22 0.578
2.23 0.581
2.24 0.584
2.25 0.587
2.26 0.59
2.27 0.593
2.28 0.596
2.29 0.599
2.3 0.602
2.31 0.605
2.32 0.608
2.33 0.611
2.34 0.614
2.35 0.617
2.36 0.62
2.37 0.623
2.38 0.626
2.39 0.629
2.4 0.632
2.41 0.6352
2.42 0.6384
2.43 0.6416
2.44 0.6448
2.45 0.648
2.46 0.651
2.47 0.654
2.48 0.657
TOWER-E,KARNAL Sh. 56/69

0.17 0.0388

0.18 0.0412
0.19 0.0436
2.49 0.66
2.5 0.663
2.51 0.6662
2.52 0.6694
2.53 0.6726
2.54 0.6758
2.55 0.679
2.56 0.6822
2.57 0.6854
2.58 0.6886
2.59 0.6918
2.6 0.695
2.61 0.6982
2.62 0.7014
2.63 0.7046
2.64 0.7078
2.65 0.711
2.66 0.7142
2.67 0.7174
2.68 0.7206
2.69 0.7238
2.7 0.727
2.71 0.7304
2.72 0.7338
2.73 0.7372
2.74 0.7406
2.74999999999999 0.744
2.75999999999999 0.7472
2.76999999999999 0.7504
2.77999999999999 0.7536
2.78999999999999 0.7568
2.79999999999999 0.76
2.80999999999999 0.7634
2.81999999999999 0.7668
2.82999999999999 0.7702
2.83999999999999 0.7736
2.84999999999999 0.777
2.85999999999999 0.7804
2.86999999999999 0.7838
2.87999999999999 0.7872
2.88999999999999 0.7906
2.89999999999999 0.794
2.90999999999999 0.7974
2.91999999999999 0.8008
2.92999999999999 0.8042
2.93999999999999 0.8076
2.94999999999999 0.811
2.95999999999999 0.8144
2.96999999999999 0.8178
2.97999999999999 0.8212
2.98999999999999 0.8246
2.99999999999999 0.828
3.00999999999999 0.8314
3.01999999999999 0.8348
3.02999999999999 0.8382
3.03999999999999 0.8416
3.04999999999999 0.845
3.05999999999999 0.8486
3.06999999999999 0.8522
3.07999999999999 0.8558
3.08999999999999 0.8594
3.09999999999999 0.863
3.10999999999999 0.8664
3.11999999999999 0.8698
3.12999999999999 0.8732
3.13999999999999 0.8766
3.14999999999999 0.88
3.15999999999999 0.8836
3.17 0.8872
3.17999999999999 0.8908
3.19 0.8944
3.19999999999999 0.898
3.21 0.9016
3.22 0.9052
3.23 0.9088
3.24 0.9124
3.25 0.916
3.26 0.9198
3.27 0.9236
3.28 0.9274
3.29 0.9312
3.3 0.935
3.31 0.9388
3.32 0.9426
TOWER-E,KARNAL Sh. 57/69

Mu/
bd2(fck-
Pt M25 25) fy-500
0 0.12
0.17 0.1032

0.18 0.1056
0.19 0.108
0.2 0.1104
0.21 0.1128
0.22 0.1152

0.23 0.1176
0.24 0.12

0.25 0.12

0.26 0.12

0.27 0.12

0.28 0.12
0.29 0.12

0.15 0.29 0.3 0.12

0.16 0.297 0.31 0.12
0.17 0.304 0.32 0.12
0.18 0.311 0.33 0.12
0.19 0.318 0.34 0.12
0.20 0.325 0.35 0.12
0.21 0.332 0.36 0.12
0.22 0.339 0.37 0.12
0.23 0.346 0.38 0.12
0.24 0.353 0.39 0.12

0.25 0.36 0.4 0.12

0.26 0.3652 0.41 0.12

0.27 0.3704 0.42 0.12
0.28 0.3756 0.43 0.12
0.29 0.3808 0.44 0.12

0.3 0.386 0.45 0.12

0.31 0.3912 0.46 0.12

0.32 0.3964 0.47 0.12

0.33 0.4016 0.48 0.12

0.34 0.4068 0.49 0.12

0.35 0.412 0.5 0.118

0.36 0.4172 0.51 0.1204

0.37 0.4224 0.52 0.1228
0.38 0.4276 0.53 0.1252
0.39 0.4328 0.54 0.1276
0.40 0.4380 0.55 0.13
0.41 0.4432 0.56 0.1324

0.42 0.4484 0.57 0.1348

TOWER-E,KARNAL Sh. 58/69

0.17 0.1032

0.18 0.1056
0.19 0.108
0.43 0.4536 0.58 0.1372
0.44 0.4588 0.59 0.1396
0.45 0.4640 0.6 0.142
0.46 0.4692 0.61 0.1444
0.47 0.4744 0.62 0.1468
0.48 0.4796 0.63 0.1492

0.49 0.4848 0.64 0.1516

0.50 0.4900 0.65 0.154
0.51 0.4932 0.66 0.1566
0.52 0.4964 0.67 0.1592
0.53 0.4996 0.68 0.1618
0.54 0.5028 0.69 0.1644
0.55 0.5060 0.7 0.167
0.56 0.5092 0.71 0.1696
0.57 0.5124 0.72 0.1722
0.58 0.5156 0.73 0.1748
0.59 0.5188 0.74 0.1774
0.60 0.5220 0.75 0.179
0.61 0.5252 0.76 0.1814
0.62 0.5284 0.77 0.1838

0.63 0.5316 0.78 0.1862

0.64 0.5348 0.79 0.1886

0.65 0.5380 0.8 0.191
0.66 0.5412 0.81 0.1936
0.67 0.5444 0.82 0.1962
0.68 0.5476 0.83 0.1988
0.69 0.5508 0.84 0.2014
0.70 0.5540 0.85 0.204
0.71 0.5572 0.86 0.2064
0.72 0.5604 0.87 0.2088

0.73 0.5636 0.88 0.2112

0.74 0.5668 0.89 0.2136
0.75 0.57 0.9 0.216
0.76 0.5728 0.91 0.2186
0.77 0.5756 0.92 0.2212
0.78 0.5784 0.93 0.2238
0.79 0.5812 0.94 0.2264
0.80 0.5840 0.95 0.229
0.81 0.5868 0.96 0.2316
0.82 0.5896 0.97 0.2342
0.83 0.5924 0.98 0.2368
0.84 0.5952 0.99 0.2394
0.85 0.5980 1 0.242
0.86 0.6008 1.01 0.2446
0.87 0.6036 1.02 0.2472
0.88 0.6064 1.03 0.2498

0.89 0.6092 1.04 0.2524

0.90 0.6120 1.05 0.255
TOWER-E,KARNAL Sh. 59/69

0.17 0.1032

0.18 0.1056
0.19 0.108
0.91 0.6148 1.06 0.2574

0.92 0.6176 1.07 0.2598

0.93 0.6204 1.08 0.2622
0.94 0.6232 1.09 0.2646
0.95 0.6260 1.1 0.267
0.96 0.6288 1.11 0.2696
0.97 0.6316 1.12 0.2722
0.98 0.6344 1.13 0.2748
0.99 0.6372 1.14 0.2774

1 0.64 1.15 0.28

1.16 0.2826
1.17 0.2852
1.18 0.2878
1.19 0.2904
1.2 0.293
1.21 0.2956
1.22 0.2982
1.23 0.3008
1.24 0.3034
1.25 0.306
1.26 0.3088
1.27 0.3116
1.28 0.3144
1.29 0.3172
1.3 0.32
1.31 0.3226
1.32 0.3252
1.33 0.3278
1.34 0.3304
1.35 0.333
1.36 0.3356
1.37 0.3382
1.38 0.3408
1.39 0.3434
1.4 0.346
1.41 0.3486
1.42 0.3512
1.43 0.3538
1.44 0.3564
1.45 0.359
1.46 0.3618
1.47 0.3646
1.48 0.3674
1.49 0.3702
1.5 0.373
1.51 0.3758
1.52 0.3786
1.53 0.3814
1.54 0.3842
1.55 0.387
1.56 0.3896
1.57 0.3922
1.58 0.3948
1.59 0.3974
1.6 0.4
1.61 0.4028
1.62 0.4056
1.63 0.4084
1.64 0.4112
1.65 0.414
1.66 0.4168
1.67 0.4196
1.68 0.4224
1.69 0.4252
1.7 0.428
1.71 0.4308
1.72 0.4336
1.73 0.4364
1.74 0.4392
1.75 0.442
1.76 0.4448
1.77 0.4476
1.78 0.4504
1.79 0.4532
1.8 0.456
1.81 0.4588
TOWER-E,KARNAL Sh. 60/69

0.17 0.1032

0.18 0.1056
0.19 0.108
1.82 0.4616
1.83 0.4644
1.84 0.4672
1.85 0.47
1.86 0.4728
1.87 0.4756
1.88 0.4784
1.89 0.4812
1.9 0.484
1.91 0.4868
1.92 0.4896
1.93 0.4924
1.94 0.4952
1.95 0.498
1.96 0.501
1.97 0.504
1.98 0.507
1.99 0.51
2 0.513
2.01 0.5158
2.02 0.5186
2.03 0.5214
2.04 0.5242
2.05 0.527
2.06 0.53
2.07 0.533
2.08 0.536
2.09 0.539
2.1 0.542
2.11 0.545
2.12 0.548
2.13 0.551
2.14 0.554
2.15 0.557
2.16 0.56
2.17 0.563
2.18 0.566
2.19 0.569
2.2 0.572
2.21 0.575
2.22 0.578
2.23 0.581
2.24 0.584
2.25 0.587
2.26 0.59
2.27 0.593
2.28 0.596
2.29 0.599
2.3 0.602
2.31 0.605
2.32 0.608
2.33 0.611
2.34 0.614
2.35 0.617
2.36 0.62
2.37 0.623
2.38 0.626
2.39 0.629
2.4 0.632
2.41 0.6352
2.42 0.6384
2.43 0.6416
2.44 0.6448
2.45 0.648
2.46 0.651
2.47 0.654
2.48 0.657
TOWER-E,KARNAL Sh. 61/69

0.17 0.1032

0.18 0.1056
0.19 0.108
2.49 0.66
2.5 0.663
2.51 0.6662
2.52 0.6694
2.53 0.6726
2.54 0.6758
2.55 0.679
2.56 0.6822
2.57 0.6854
2.58 0.6886
2.59 0.6918
2.6 0.695
2.61 0.6982
2.62 0.7014
2.63 0.7046
2.64 0.7078
2.65 0.711
2.66 0.7142
2.67 0.7174
2.68 0.7206
2.69 0.7238
2.7 0.727
2.71 0.7304
2.72 0.7338
2.73 0.7372
2.74 0.7406
2.75 0.744
2.76 0.7472
2.77 0.7504
2.78 0.7536
2.79 0.7568
2.8 0.76
2.81 0.7634
2.82 0.7668
2.83 0.7702
2.84 0.7736
2.85 0.777
2.86 0.7804
2.87 0.7838
2.88 0.7872
2.89 0.7906
2.9 0.794
2.91 0.7974
2.92 0.8008
2.93 0.8042
2.94 0.8076
2.95 0.811
2.96 0.8144
2.97 0.8178
2.98 0.8212
2.99 0.8246
3 0.828
3.01 0.8314
3.02 0.8348
3.03 0.8382
3.04 0.8416
3.05 0.845
3.06 0.8486
3.07 0.8522
3.08 0.8558
3.09 0.8594
3.1 0.863
3.11 0.8664
3.12 0.8698
3.13 0.8732
3.14 0.8766
3.15 0.88
3.16 0.8836
3.17 0.8872
3.18 0.8908
3.19 0.8944
3.2 0.898
3.21 0.9016
3.22 0.9052
3.23 0.9088
3.24 0.9124
3.25 0.916
3.26 0.9198
3.27 0.9236
3.28 0.9274
3.29 0.9312
3.3 0.935
3.31 0.9388
3.32 0.9426
TOWER-E,KARNAL Sh. 62/69

0.17 0.1032

0.18 0.1056
0.19 0.108

CASE 1 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09
1 - 0.032 0.0325 0.033 0.0335 0.034 0.0345 0.035 0.0355 0.036 0.0365
+ 0.024 0.0244 0.0248 0.0252 0.0256 0.026 0.0264 0.0268 0.0272 0.0276
2 - 0.037 0.0376 0.0382 0.0388 0.0394 0.04 0.0406 0.0412 0.0418 0.0424
+ 0.028 0.0284 0.0288 0.0292 0.0296 0.03 0.0304 0.0308 0.0312 0.0316
3 - 0.037 0.0377 0.0384 0.0391 0.0398 0.0405 0.0412 0.0419 0.0426 0.0433
+ 0.028 0.0285 0.029 0.0295 0.03 0.0305 0.031 0.0315 0.032 0.0325
4 - 0.047 0.0476 0.0482 0.0488 0.0494 0.05 0.0506 0.0512 0.0518 0.0524
+ 0.035 0.0355 0.036 0.0365 0.037 0.0375 0.038 0.0385 0.039 0.0395
5 - 0.045 0.0454 0.0458 0.0462 0.0466 0.047 0.0474 0.0478 0.0482 0.0486
+ 0.035 0.0352 0.0354 0.0356 0.0358 0.036 0.0362 0.0364 0.0366 0.0368
6 - 0 0 0 0 0 0 0 0 0 0
+ 0.035 0.0358 0.0366 0.0374 0.0382 0.039 0.0398 0.0406 0.0414 0.0422
7 - 0.057 0.0577 0.0584 0.0591 0.0598 0.0605 0.0612 0.0619 0.0626 0.0633
+ 0.043 0.0435 0.044 0.0445 0.045 0.0455 0.046 0.0465 0.047 0.0475
8 - 0 0 0 0 0 0 0 0 0 0
+ 0.043 0.0438 0.0446 0.0454 0.0462 0.047 0.0478 0.0486 0.0494 0.0502
9 - 0 0 0 0 0 0 0 0 0
+ 0.056 0.0568 0.0576 0.0584 0.0592 0.06 0.0608 0.0616 0.0624 0.0632

-ve
CASE 1 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08
1 - 1 0.032 0.0325 0.033 0.0335 0.034 0.0345 0.035 0.0355 0.036
2 - 2 0.037 0.0376 0.0382 0.0388 0.0394 0.04 0.0406 0.0412 0.0418
3 - 3 0.037 0.0377 0.0384 0.0391 0.0398 0.0405 0.0412 0.0419 0.0426
4 - 4 0.047 0.0476 0.0482 0.0488 0.0494 0.05 0.0506 0.0512 0.0518
5 - 5 0.045 0.0454 0.0458 0.0462 0.0466 0.047 0.0474 0.0478 0.0482
6 - 6 0 0 0 0 0 0 0 0 0
7 - 7 0.057 0.0577 0.0584 0.0591 0.0598 0.0605 0.0612 0.0619 0.0626
8 - 8 0 0 0 0 0 0 0 0 0
9 - 9 0 0 0 0 0 0 0 0

+ve
CASE 1 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08
1 + 1 0.024 0.0244 0.0248 0.0252 0.0256 0.026 0.0264 0.0268 0.0272
2 + 2 0.028 0.0284 0.0288 0.0292 0.0296 0.03 0.0304 0.0308 0.0312
3 + 3 0.028 0.0285 0.029 0.0295 0.03 0.0305 0.031 0.0315 0.032
4 + 4 0.035 0.0355 0.036 0.0365 0.037 0.0375 0.038 0.0385 0.039
5 + 5 0.035 0.0352 0.0354 0.0356 0.0358 0.036 0.0362 0.0364 0.0366
6 + 6 0.035 0.0358 0.0366 0.0374 0.0382 0.039 0.0398 0.0406 0.0414
7 + 7 0.043 0.0435 0.044 0.0445 0.045 0.0455 0.046 0.0465 0.047
8 + 8 0.043 0.0438 0.0446 0.0454 0.0462 0.047 0.0478 0.0486 0.0494
9 + 9 0.056 0.0568 0.0576 0.0584 0.0592 0.06 0.0608 0.0616 0.0624
TOWER-E,KARNAL Sh. 63/69

1.1 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.2 1.21 1.22 1.23
0.037 0.0376 0.0382 0.0388 0.0394 0.04 0.0406 0.0412 0.0418 0.0424 0.043 0.0434 0.0438 0.0442
0.028 0.0284 0.0288 0.0292 0.0296 0.03 0.0304 0.0308 0.0312 0.0316 0.032 0.0324 0.0328 0.0332
0.043 0.0435 0.044 0.0445 0.045 0.0455 0.046 0.0465 0.047 0.0475 0.048 0.0483 0.0486 0.0489
0.032 0.0324 0.0328 0.0332 0.0336 0.034 0.0344 0.0348 0.0352 0.0356 0.036 0.0363 0.0366 0.0369
0.044 0.0448 0.0456 0.0464 0.0472 0.048 0.0488 0.0496 0.0504 0.0512 0.052 0.0525 0.053 0.0535
0.033 0.0336 0.0342 0.0348 0.0354 0.036 0.0366 0.0372 0.0378 0.0384 0.039 0.0395 0.04 0.0405
0.053 0.0537 0.0544 0.0551 0.0558 0.0565 0.0572 0.0579 0.0586 0.0593 0.06 0.0605 0.061 0.0615
0.04 0.0405 0.041 0.0415 0.042 0.0425 0.043 0.0435 0.044 0.0445 0.045 0.0454 0.0458 0.0462
0.049 0.0493 0.0496 0.0499 0.0502 0.0505 0.0508 0.0511 0.0514 0.0517 0.052 0.0524 0.0528 0.0532
0.037 0.0373 0.0376 0.0379 0.0382 0.0385 0.0388 0.0391 0.0394 0.0397 0.04 0.0403 0.0406 0.0409
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.043 0.0437 0.0444 0.0451 0.0458 0.0465 0.0472 0.0479 0.0486 0.0493 0.05 0.0507 0.0514 0.0521
0.064 0.0647 0.0654 0.0661 0.0668 0.0675 0.0682 0.0689 0.0696 0.0703 0.071 0.0715 0.072 0.0725
0.048 0.0485 0.049 0.0495 0.05 0.0505 0.051 0.0515 0.052 0.0525 0.053 0.0534 0.0538 0.0542
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.051 0.0518 0.0526 0.0534 0.0542 0.055 0.0558 0.0566 0.0574 0.0582 0.059 0.0596 0.0602 0.0608
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.064 0.0648 0.0656 0.0664 0.0672 0.068 0.0688 0.0696 0.0704 0.0712 0.072 0.0727 0.0734 0.0741

1.09 1.1 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.2 1.21 1.22
0.0365 0.037 0.0376 0.0382 0.0388 0.0394 0.04 0.0406 0.0412 0.0418 0.0424 0.043 0.0434 0.0438
0.0424 0.043 0.0435 0.044 0.0445 0.045 0.0455 0.046 0.0465 0.047 0.0475 0.048 0.0483 0.0486
0.0433 0.044 0.0448 0.0456 0.0464 0.0472 0.048 0.0488 0.0496 0.0504 0.0512 0.052 0.0525 0.053
0.0524 0.053 0.0537 0.0544 0.0551 0.0558 0.0565 0.0572 0.0579 0.0586 0.0593 0.06 0.0605 0.061
0.0486 0.049 0.0493 0.0496 0.0499 0.0502 0.0505 0.0508 0.0511 0.0514 0.0517 0.052 0.0524 0.0528
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0633 0.064 0.0647 0.0654 0.0661 0.0668 0.0675 0.0682 0.0689 0.0696 0.0703 0.071 0.0715 0.072
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0

1.09 1.1 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.2 1.21 1.22
0.0276 0.028 0.0284 0.0288 0.0292 0.0296 0.03 0.0304 0.0308 0.0312 0.0316 0.032 0.0324 0.0328
0.0316 0.032 0.0324 0.0328 0.0332 0.0336 0.034 0.0344 0.0348 0.0352 0.0356 0.036 0.0363 0.0366
0.0325 0.033 0.0336 0.0342 0.0348 0.0354 0.036 0.0366 0.0372 0.0378 0.0384 0.039 0.0395 0.04
0.0395 0.04 0.0405 0.041 0.0415 0.042 0.0425 0.043 0.0435 0.044 0.0445 0.045 0.0454 0.0458
0.0368 0.037 0.0373 0.0376 0.0379 0.0382 0.0385 0.0388 0.0391 0.0394 0.0397 0.04 0.0403 0.0406
0.0422 0.043 0.0437 0.0444 0.0451 0.0458 0.0465 0.0472 0.0479 0.0486 0.0493 0.05 0.0507 0.0514
0.0475 0.048 0.0485 0.049 0.0495 0.05 0.0505 0.051 0.0515 0.052 0.0525 0.053 0.0534 0.0538
0.0502 0.051 0.0518 0.0526 0.0534 0.0542 0.055 0.0558 0.0566 0.0574 0.0582 0.059 0.0596 0.0602
0.0632 0.064 0.0648 0.0656 0.0664 0.0672 0.068 0.0688 0.0696 0.0704 0.0712 0.072 0.0727 0.0734
TOWER-E,KARNAL Sh. 64/69

1.24 1.25 1.26 1.27 1.28 1.29 1.3 1.31 1.32 1.33 1.34 1.35 1.36 1.37
0.0446 0.045 0.0454 0.0458 0.0462 0.0466 0.047 0.0474 0.0478 0.0482 0.0486 0.049 0.0494 0.0498
0.0336 0.034 0.0344 0.0348 0.0352 0.0356 0.036 0.0363 0.0366 0.0369 0.0372 0.0375 0.0378 0.0381
0.0492 0.0495 0.0498 0.0501 0.0504 0.0507 0.051 0.0514 0.0518 0.0522 0.0526 0.053 0.0534 0.0538
0.0372 0.0375 0.0378 0.0381 0.0384 0.0387 0.039 0.0392 0.0394 0.0396 0.0398 0.04 0.0402 0.0404
0.054 0.0545 0.055 0.0555 0.056 0.0565 0.057 0.0576 0.0582 0.0588 0.0594 0.06 0.0606 0.0612
0.041 0.0415 0.042 0.0425 0.043 0.0435 0.044 0.0443 0.0446 0.0449 0.0452 0.0455 0.0458 0.0461
0.062 0.0625 0.063 0.0635 0.064 0.0645 0.065 0.0656 0.0662 0.0668 0.0674 0.068 0.0686 0.0692
0.0466 0.047 0.0474 0.0478 0.0482 0.0486 0.049 0.0494 0.0498 0.0502 0.0506 0.051 0.0514 0.0518
0.0536 0.054 0.0544 0.0548 0.0552 0.0556 0.056 0.0563 0.0566 0.0569 0.0572 0.0575 0.0578 0.0581
0.0412 0.0415 0.0418 0.0421 0.0424 0.0427 0.043 0.0431 0.0432 0.0433 0.0434 0.0435 0.0436 0.0437
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0528 0.0535 0.0542 0.0549 0.0556 0.0563 0.057 0.0576 0.0582 0.0588 0.0594 0.06 0.0606 0.0612
0.073 0.0735 0.074 0.0745 0.075 0.0755 0.076 0.0764 0.0768 0.0772 0.0776 0.078 0.0784 0.0788
0.0546 0.055 0.0554 0.0558 0.0562 0.0566 0.057 0.0573 0.0576 0.0579 0.0582 0.0585 0.0588 0.0591
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0614 0.062 0.0626 0.0632 0.0638 0.0644 0.065 0.0656 0.0662 0.0668 0.0674 0.068 0.0686 0.0692
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0748 0.0755 0.0762 0.0769 0.0776 0.0783 0.079 0.0796 0.0802 0.0808 0.0814 0.082 0.0826 0.0832

1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.3 1.31 1.32 1.33 1.34 1.35 1.36
0.0442 0.0446 0.045 0.0454 0.0458 0.0462 0.0466 0.047 0.0474 0.0478 0.0482 0.0486 0.049 0.0494
0.0489 0.0492 0.0495 0.0498 0.0501 0.0504 0.0507 0.051 0.0514 0.0518 0.0522 0.0526 0.053 0.0534
0.0535 0.054 0.0545 0.055 0.0555 0.056 0.0565 0.057 0.0576 0.0582 0.0588 0.0594 0.06 0.0606
0.0615 0.062 0.0625 0.063 0.0635 0.064 0.0645 0.065 0.0656 0.0662 0.0668 0.0674 0.068 0.0686
0.0532 0.0536 0.054 0.0544 0.0548 0.0552 0.0556 0.056 0.0563 0.0566 0.0569 0.0572 0.0575 0.0578
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0725 0.073 0.0735 0.074 0.0745 0.075 0.0755 0.076 0.0764 0.0768 0.0772 0.0776 0.078 0.0784
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0

1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.3 1.31 1.32 1.33 1.34 1.35 1.36
0.0332 0.0336 0.034 0.0344 0.0348 0.0352 0.0356 0.036 0.0363 0.0366 0.0369 0.0372 0.0375 0.0378
0.0369 0.0372 0.0375 0.0378 0.0381 0.0384 0.0387 0.039 0.0392 0.0394 0.0396 0.0398 0.04 0.0402
0.0405 0.041 0.0415 0.042 0.0425 0.043 0.0435 0.044 0.0443 0.0446 0.0449 0.0452 0.0455 0.0458
0.0462 0.0466 0.047 0.0474 0.0478 0.0482 0.0486 0.049 0.0494 0.0498 0.0502 0.0506 0.051 0.0514
0.0409 0.0412 0.0415 0.0418 0.0421 0.0424 0.0427 0.043 0.0431 0.0432 0.0433 0.0434 0.0435 0.0436
0.0521 0.0528 0.0535 0.0542 0.0549 0.0556 0.0563 0.057 0.0576 0.0582 0.0588 0.0594 0.06 0.0606
0.0542 0.0546 0.055 0.0554 0.0558 0.0562 0.0566 0.057 0.0573 0.0576 0.0579 0.0582 0.0585 0.0588
0.0608 0.0614 0.062 0.0626 0.0632 0.0638 0.0644 0.065 0.0656 0.0662 0.0668 0.0674 0.068 0.0686
0.0741 0.0748 0.0755 0.0762 0.0769 0.0776 0.0783 0.079 0.0796 0.0802 0.0808 0.0814 0.082 0.0826
TOWER-E,KARNAL Sh. 65/69

1.38 1.39 1.4 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.5 1.51
0.0502 0.0506 0.051 0.0512 0.0514 0.0516 0.0518 0.052 0.0522 0.0524 0.0526 0.0528 0.053 0.05328
0.0384 0.0387 0.039 0.0392 0.0394 0.0396 0.0398 0.04 0.0402 0.0404 0.0406 0.0408 0.041 0.04116
0.0542 0.0546 0.055 0.0552 0.0554 0.0556 0.0558 0.056 0.0562 0.0564 0.0566 0.0568 0.057 0.05728
0.0406 0.0408 0.041 0.0413 0.0416 0.0419 0.0422 0.0425 0.0428 0.0431 0.0434 0.0437 0.044 0.04416
0.0618 0.0624 0.063 0.0634 0.0638 0.0642 0.0646 0.065 0.0654 0.0658 0.0662 0.0666 0.067 0.0674
0.0464 0.0467 0.047 0.0474 0.0478 0.0482 0.0486 0.049 0.0494 0.0498 0.0502 0.0506 0.051 0.05132
0.0698 0.0704 0.071 0.0714 0.0718 0.0722 0.0726 0.073 0.0734 0.0738 0.0742 0.0746 0.075 0.07536
0.0522 0.0526 0.053 0.0533 0.0536 0.0539 0.0542 0.0545 0.0548 0.0551 0.0554 0.0557 0.056 0.05628
0.0584 0.0587 0.059 0.0591 0.0592 0.0593 0.0594 0.0595 0.0596 0.0597 0.0598 0.0599 0.06 0.0602
0.0438 0.0439 0.044 0.0441 0.0442 0.0443 0.0444 0.0445 0.0446 0.0447 0.0448 0.0449 0.045 0.04516
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0618 0.0624 0.063 0.0635 0.064 0.0645 0.065 0.0655 0.066 0.0665 0.067 0.0675 0.068 0.06848
0.0792 0.0796 0.08 0.0804 0.0808 0.0812 0.0816 0.082 0.0824 0.0828 0.0832 0.0836 0.084 0.08428
0.0594 0.0597 0.06 0.0604 0.0608 0.0612 0.0616 0.062 0.0624 0.0628 0.0632 0.0636 0.064 0.0642
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0698 0.0704 0.071 0.0715 0.072 0.0725 0.073 0.0735 0.074 0.0745 0.075 0.0755 0.076 0.07644
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0838 0.0844 0.085 0.0854 0.0858 0.0862 0.0866 0.087 0.0874 0.0878 0.0882 0.0886 0.089 0.08944

1.37 1.38 1.39 1.4 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.5
0.0498 0.0502 0.0506 0.051 0.0512 0.0514 0.0516 0.0518 0.052 0.0522 0.0524 0.0526 0.0528 0.053
0.0538 0.0542 0.0546 0.055 0.0552 0.0554 0.0556 0.0558 0.056 0.0562 0.0564 0.0566 0.0568 0.057
0.0612 0.0618 0.0624 0.063 0.0634 0.0638 0.0642 0.0646 0.065 0.0654 0.0658 0.0662 0.0666 0.067
0.0692 0.0698 0.0704 0.071 0.0714 0.0718 0.0722 0.0726 0.073 0.0734 0.0738 0.0742 0.0746 0.075
0.0581 0.0584 0.0587 0.059 0.0591 0.0592 0.0593 0.0594 0.0595 0.0596 0.0597 0.0598 0.0599 0.06
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0788 0.0792 0.0796 0.08 0.0804 0.0808 0.0812 0.0816 0.082 0.0824 0.0828 0.0832 0.0836 0.084
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0

1.37 1.38 1.39 1.4 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.5
0.0381 0.0384 0.0387 0.039 0.0392 0.0394 0.0396 0.0398 0.04 0.0402 0.0404 0.0406 0.0408 0.041
0.0404 0.0406 0.0408 0.041 0.0413 0.0416 0.0419 0.0422 0.0425 0.0428 0.0431 0.0434 0.0437 0.044
0.0461 0.0464 0.0467 0.047 0.0474 0.0478 0.0482 0.0486 0.049 0.0494 0.0498 0.0502 0.0506 0.051
0.0518 0.0522 0.0526 0.053 0.0533 0.0536 0.0539 0.0542 0.0545 0.0548 0.0551 0.0554 0.0557 0.056
0.0437 0.0438 0.0439 0.044 0.0441 0.0442 0.0443 0.0444 0.0445 0.0446 0.0447 0.0448 0.0449 0.045
0.0612 0.0618 0.0624 0.063 0.0635 0.064 0.0645 0.065 0.0655 0.066 0.0665 0.067 0.0675 0.068
0.0591 0.0594 0.0597 0.06 0.0604 0.0608 0.0612 0.0616 0.062 0.0624 0.0628 0.0632 0.0636 0.064
0.0692 0.0698 0.0704 0.071 0.0715 0.072 0.0725 0.073 0.0735 0.074 0.0745 0.075 0.0755 0.076
0.0832 0.0838 0.0844 0.085 0.0854 0.0858 0.0862 0.0866 0.087 0.0874 0.0878 0.0882 0.0886 0.089
TOWER-E,KARNAL Sh. 66/69

1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.6 1.61 1.62 1.63 1.64 1.65
0.05356 0.05384 0.05412 0.0544 0.05468 0.05496 0.05524 0.05552 0.0558 0.05608 0.05636 0.05664 0.05692 0.0572
0.04132 0.04148 0.04164 0.0418 0.04196 0.04212 0.04228 0.04244 0.0426 0.04276 0.04292 0.04308 0.04324 0.0434
0.05756 0.05784 0.05812 0.0584 0.05868 0.05896 0.05924 0.05952 0.0598 0.06008 0.06036 0.06064 0.06092 0.0612
0.04432 0.04448 0.04464 0.0448 0.04496 0.04512 0.04528 0.04544 0.0456 0.04576 0.04592 0.04608 0.04624 0.0464
0.0678 0.0682 0.0686 0.069 0.0694 0.0698 0.0702 0.0706 0.071 0.0714 0.0718 0.0722 0.0726 0.073
0.05164 0.05196 0.05228 0.0526 0.05292 0.05324 0.05356 0.05388 0.0542 0.05452 0.05484 0.05516 0.05548 0.0558
0.07572 0.07608 0.07644 0.0768 0.07716 0.07752 0.07788 0.07824 0.0786 0.07896 0.07932 0.07968 0.08004 0.0804
0.05656 0.05684 0.05712 0.0574 0.05768 0.05796 0.05824 0.05852 0.0588 0.05908 0.05936 0.05964 0.05992 0.0602
0.0604 0.0606 0.0608 0.061 0.0612 0.0614 0.0616 0.0618 0.062 0.0622 0.0624 0.0626 0.0628 0.063
0.04532 0.04548 0.04564 0.0458 0.04596 0.04612 0.04628 0.04644 0.0466 0.04676 0.04692 0.04708 0.04724 0.0474
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.06896 0.06944 0.06992 0.0704 0.07088 0.07136 0.07184 0.07232 0.0728 0.07328 0.07376 0.07424 0.07472 0.0752
0.08456 0.08484 0.08512 0.0854 0.08568 0.08596 0.08624 0.08652 0.0868 0.08708 0.08736 0.08764 0.08792 0.0882
0.0644 0.0646 0.0648 0.065 0.0652 0.0654 0.0656 0.0658 0.066 0.0662 0.0664 0.0666 0.0668 0.067
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.07688 0.07732 0.07776 0.0782 0.07864 0.07908 0.07952 0.07996 0.0804 0.08084 0.08128 0.08172 0.08216 0.0826
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.08988 0.09032 0.09076 0.0912 0.09164 0.09208 0.09252 0.09296 0.0934 0.09384 0.09428 0.09472 0.09516 0.0956

1.51 1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.6 1.61 1.62 1.63 1.64
0.05328 0.05356 0.05384 0.05412 0.0544 0.05468 0.05496 0.05524 0.05552 0.0558 0.05608 0.05636 0.05664 0.05692
0.05728 0.05756 0.05784 0.05812 0.0584 0.05868 0.05896 0.05924 0.05952 0.0598 0.06008 0.06036 0.06064 0.06092
0.0674 0.0678 0.0682 0.0686 0.069 0.0694 0.0698 0.0702 0.0706 0.071 0.0714 0.0718 0.0722 0.0726
0.07536 0.07572 0.07608 0.07644 0.0768 0.07716 0.07752 0.07788 0.07824 0.0786 0.07896 0.07932 0.07968 0.08004
0.0602 0.0604 0.0606 0.0608 0.061 0.0612 0.0614 0.0616 0.0618 0.062 0.0622 0.0624 0.0626 0.0628
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.08428 0.08456 0.08484 0.08512 0.0854 0.08568 0.08596 0.08624 0.08652 0.0868 0.08708 0.08736 0.08764 0.08792
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0

1.51 1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.6 1.61 1.62 1.63 1.64
0.04116 0.04132 0.04148 0.04164 0.0418 0.04196 0.04212 0.04228 0.04244 0.0426 0.04276 0.04292 0.04308 0.04324
0.04416 0.04432 0.04448 0.04464 0.0448 0.04496 0.04512 0.04528 0.04544 0.0456 0.04576 0.04592 0.04608 0.04624
0.05132 0.05164 0.05196 0.05228 0.0526 0.05292 0.05324 0.05356 0.05388 0.0542 0.05452 0.05484 0.05516 0.05548
0.05628 0.05656 0.05684 0.05712 0.0574 0.05768 0.05796 0.05824 0.05852 0.0588 0.05908 0.05936 0.05964 0.05992
0.04516 0.04532 0.04548 0.04564 0.0458 0.04596 0.04612 0.04628 0.04644 0.0466 0.04676 0.04692 0.04708 0.04724
0.06848 0.06896 0.06944 0.06992 0.0704 0.07088 0.07136 0.07184 0.07232 0.0728 0.07328 0.07376 0.07424 0.07472
0.0642 0.0644 0.0646 0.0648 0.065 0.0652 0.0654 0.0656 0.0658 0.066 0.0662 0.0664 0.0666 0.0668
0.07644 0.07688 0.07732 0.07776 0.0782 0.07864 0.07908 0.07952 0.07996 0.0804 0.08084 0.08128 0.08172 0.08216
0.08944 0.08988 0.09032 0.09076 0.0912 0.09164 0.09208 0.09252 0.09296 0.0934 0.09384 0.09428 0.09472 0.09516
TOWER-E,KARNAL Sh. 67/69

1.66 1.67 1.68 1.69 1.7 1.71 1.72 1.73 1.74 1.75 1.76 1.77 1.78 1.79
0.05748 0.05776 0.05804 0.05832 0.0586 0.05888 0.05916 0.05944 0.05972 0.06 0.0602 0.0604 0.0606 0.0608
0.04356 0.04372 0.04388 0.04404 0.0442 0.04436 0.04452 0.04468 0.04484 0.045 0.04516 0.04532 0.04548 0.04564
0.06148 0.06176 0.06204 0.06232 0.0626 0.06288 0.06316 0.06344 0.06372 0.064 0.06416 0.06432 0.06448 0.06464
0.04656 0.04672 0.04688 0.04704 0.0472 0.04736 0.04752 0.04768 0.04784 0.048 0.04816 0.04832 0.04848 0.04864
0.0734 0.0738 0.0742 0.0746 0.075 0.0754 0.0758 0.0762 0.0766 0.077 0.07732 0.07764 0.07796 0.07828
0.05612 0.05644 0.05676 0.05708 0.0574 0.05772 0.05804 0.05836 0.05868 0.059 0.05924 0.05948 0.05972 0.05996
0.08076 0.08112 0.08148 0.08184 0.0822 0.08256 0.08292 0.08328 0.08364 0.084 0.08428 0.08456 0.08484 0.08512
0.06048 0.06076 0.06104 0.06132 0.0616 0.06188 0.06216 0.06244 0.06272 0.063 0.06324 0.06348 0.06372 0.06396
0.0632 0.0634 0.0636 0.0638 0.064 0.0642 0.0644 0.0646 0.0648 0.065 0.06516 0.06532 0.06548 0.06564
0.04756 0.04772 0.04788 0.04804 0.0482 0.04836 0.04852 0.04868 0.04884 0.049 0.04912 0.04924 0.04936 0.04948
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.07568 0.07616 0.07664 0.07712 0.0776 0.07808 0.07856 0.07904 0.07952 0.08 0.08032 0.08064 0.08096 0.08128
0.08848 0.08876 0.08904 0.08932 0.0896 0.08988 0.09016 0.09044 0.09072 0.091 0.09124 0.09148 0.09172 0.09196
0.0672 0.0674 0.0676 0.0678 0.068 0.0682 0.0684 0.0686 0.0688 0.069 0.06916 0.06932 0.06948 0.06964
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.08304 0.08348 0.08392 0.08436 0.0848 0.08524 0.08568 0.08612 0.08656 0.087 0.08736 0.08772 0.08808 0.08844
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.09604 0.09648 0.09692 0.09736 0.0978 0.09824 0.09868 0.09912 0.09956 0.1 0.10028 0.10056 0.10084 0.10112

1.65 1.66 1.67 1.68 1.69 1.7 1.71 1.72 1.73 1.74 1.75 1.76 1.77 1.78
0.0572 0.05748 0.05776 0.05804 0.05832 0.0586 0.05888 0.05916 0.05944 0.05972 0.06 0.0602 0.0604 0.0606
0.0612 0.06148 0.06176 0.06204 0.06232 0.0626 0.06288 0.06316 0.06344 0.06372 0.064 0.06416 0.06432 0.06448
0.073 0.0734 0.0738 0.0742 0.0746 0.075 0.0754 0.0758 0.0762 0.0766 0.077 0.07732 0.07764 0.07796
0.0804 0.08076 0.08112 0.08148 0.08184 0.0822 0.08256 0.08292 0.08328 0.08364 0.084 0.08428 0.08456 0.08484
0.063 0.0632 0.0634 0.0636 0.0638 0.064 0.0642 0.0644 0.0646 0.0648 0.065 0.06516 0.06532 0.06548
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0882 0.08848 0.08876 0.08904 0.08932 0.0896 0.08988 0.09016 0.09044 0.09072 0.091 0.09124 0.09148 0.09172
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0

1.65 1.66 1.67 1.68 1.69 1.7 1.71 1.72 1.73 1.74 1.75 1.76 1.77 1.78
0.0434 0.04356 0.04372 0.04388 0.04404 0.0442 0.04436 0.04452 0.04468 0.04484 0.045 0.04516 0.04532 0.04548
0.0464 0.04656 0.04672 0.04688 0.04704 0.0472 0.04736 0.04752 0.04768 0.04784 0.048 0.04816 0.04832 0.04848
0.0558 0.05612 0.05644 0.05676 0.05708 0.0574 0.05772 0.05804 0.05836 0.05868 0.059 0.05924 0.05948 0.05972
0.0602 0.06048 0.06076 0.06104 0.06132 0.0616 0.06188 0.06216 0.06244 0.06272 0.063 0.06324 0.06348 0.06372
0.0474 0.04756 0.04772 0.04788 0.04804 0.0482 0.04836 0.04852 0.04868 0.04884 0.049 0.04912 0.04924 0.04936
0.0752 0.07568 0.07616 0.07664 0.07712 0.0776 0.07808 0.07856 0.07904 0.07952 0.08 0.08032 0.08064 0.08096
0.067 0.0672 0.0674 0.0676 0.0678 0.068 0.0682 0.0684 0.0686 0.0688 0.069 0.06916 0.06932 0.06948
0.0826 0.08304 0.08348 0.08392 0.08436 0.0848 0.08524 0.08568 0.08612 0.08656 0.087 0.08736 0.08772 0.08808
0.0956 0.09604 0.09648 0.09692 0.09736 0.0978 0.09824 0.09868 0.09912 0.09956 0.1 0.10028 0.10056 0.10084
TOWER-E,KARNAL Sh. 68/69

1.8 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.9 1.91 1.92 1.93
0.061 0.0612 0.0614 0.0616 0.0618 0.062 0.0622 0.0624 0.0626 0.0628 0.063 0.0632 0.0634 0.0636
0.0458 0.04596 0.04612 0.04628 0.04644 0.0466 0.04676 0.04692 0.04708 0.04724 0.0474 0.04756 0.04772 0.04788
0.0648 0.06496 0.06512 0.06528 0.06544 0.0656 0.06576 0.06592 0.06608 0.06624 0.0664 0.06656 0.06672 0.06688
0.0488 0.04896 0.04912 0.04928 0.04944 0.0496 0.04976 0.04992 0.05008 0.05024 0.0504 0.05056 0.05072 0.05088
0.0786 0.07892 0.07924 0.07956 0.07988 0.0802 0.08052 0.08084 0.08116 0.08148 0.0818 0.08212 0.08244 0.08276
0.0602 0.06044 0.06068 0.06092 0.06116 0.0614 0.06164 0.06188 0.06212 0.06236 0.0626 0.06284 0.06308 0.06332
0.0854 0.08568 0.08596 0.08624 0.08652 0.0868 0.08708 0.08736 0.08764 0.08792 0.0882 0.08848 0.08876 0.08904
0.0642 0.06444 0.06468 0.06492 0.06516 0.0654 0.06564 0.06588 0.06612 0.06636 0.0666 0.06684 0.06708 0.06732
0.0658 0.06596 0.06612 0.06628 0.06644 0.0666 0.06676 0.06692 0.06708 0.06724 0.0674 0.06756 0.06772 0.06788
0.0496 0.04972 0.04984 0.04996 0.05008 0.0502 0.05032 0.05044 0.05056 0.05068 0.0508 0.05092 0.05104 0.05116
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0816 0.08192 0.08224 0.08256 0.08288 0.0832 0.08352 0.08384 0.08416 0.08448 0.0848 0.08512 0.08544 0.08576
0.0922 0.09244 0.09268 0.09292 0.09316 0.0934 0.09364 0.09388 0.09412 0.09436 0.0946 0.09484 0.09508 0.09532
0.0698 0.06996 0.07012 0.07028 0.07044 0.0706 0.07076 0.07092 0.07108 0.07124 0.0714 0.07156 0.07172 0.07188
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.0888 0.08916 0.08952 0.08988 0.09024 0.0906 0.09096 0.09132 0.09168 0.09204 0.0924 0.09276 0.09312 0.09348
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.1014 0.10168 0.10196 0.10224 0.10252 0.1028 0.10308 0.10336 0.10364 0.10392 0.1042 0.10448 0.10476 0.10504

1.79 1.8 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.9 1.91 1.92
0.0608 0.061 0.0612 0.0614 0.0616 0.0618 0.062 0.0622 0.0624 0.0626 0.0628 0.063 0.0632 0.0634
0.06464 0.0648 0.06496 0.06512 0.06528 0.06544 0.0656 0.06576 0.06592 0.06608 0.06624 0.0664 0.06656 0.06672
0.07828 0.0786 0.07892 0.07924 0.07956 0.07988 0.0802 0.08052 0.08084 0.08116 0.08148 0.0818 0.08212 0.08244
0.08512 0.0854 0.08568 0.08596 0.08624 0.08652 0.0868 0.08708 0.08736 0.08764 0.08792 0.0882 0.08848 0.08876
0.06564 0.0658 0.06596 0.06612 0.06628 0.06644 0.0666 0.06676 0.06692 0.06708 0.06724 0.0674 0.06756 0.06772
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.09196 0.0922 0.09244 0.09268 0.09292 0.09316 0.0934 0.09364 0.09388 0.09412 0.09436 0.0946 0.09484 0.09508
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0

1.79 1.8 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.9 1.91 1.92
0.04564 0.0458 0.04596 0.04612 0.04628 0.04644 0.0466 0.04676 0.04692 0.04708 0.04724 0.0474 0.04756 0.04772
0.04864 0.0488 0.04896 0.04912 0.04928 0.04944 0.0496 0.04976 0.04992 0.05008 0.05024 0.0504 0.05056 0.05072
0.05996 0.0602 0.06044 0.06068 0.06092 0.06116 0.0614 0.06164 0.06188 0.06212 0.06236 0.0626 0.06284 0.06308
0.06396 0.0642 0.06444 0.06468 0.06492 0.06516 0.0654 0.06564 0.06588 0.06612 0.06636 0.0666 0.06684 0.06708
0.04948 0.0496 0.04972 0.04984 0.04996 0.05008 0.0502 0.05032 0.05044 0.05056 0.05068 0.0508 0.05092 0.05104
0.08128 0.0816 0.08192 0.08224 0.08256 0.08288 0.0832 0.08352 0.08384 0.08416 0.08448 0.0848 0.08512 0.08544
0.06964 0.0698 0.06996 0.07012 0.07028 0.07044 0.0706 0.07076 0.07092 0.07108 0.07124 0.0714 0.07156 0.07172
0.08844 0.0888 0.08916 0.08952 0.08988 0.09024 0.0906 0.09096 0.09132 0.09168 0.09204 0.0924 0.09276 0.09312
0.10112 0.1014 0.10168 0.10196 0.10224 0.10252 0.1028 0.10308 0.10336 0.10364 0.10392 0.1042 0.10448 0.10476
TOWER-E,KARNAL Sh. 69/69

1.94 1.95 1.96 1.97 1.98 1.99 2

0.0638 0.064 0.0642 0.0644 0.0646 0.0648 0.065 0.032
0.04804 0.0482 0.04836 0.04852 0.04868 0.04884 0.049 0.024
0.06704 0.0672 0.06736 0.06752 0.06768 0.06784 0.068 0.037
0.05104 0.0512 0.05136 0.05152 0.05168 0.05184 0.052 0.028
0.08308 0.0834 0.08372 0.08404 0.08436 0.08468 0.085 0.037
0.06356 0.0638 0.06404 0.06428 0.06452 0.06476 0.065 0.28
0.08932 0.0896 0.08988 0.09016 0.09044 0.09072 0.091 0.047
0.06756 0.0678 0.06804 0.06828 0.06852 0.06876 0.069 0.035
0.06804 0.0682 0.06836 0.06852 0.06868 0.06884 0.069
0.05128 0.0514 0.05152 0.05164 0.05176 0.05188 0.052 0.035
0 0 0 0 0 0 0 0 0.045
0.08608 0.0864 0.08672 0.08704 0.08736 0.08768 0.088 0.035
0.09556 0.0958 0.09604 0.09628 0.09652 0.09676 0.097
0.07204 0.0722 0.07236 0.07252 0.07268 0.07284 0.073 0.043
0 0 0 0 0 0 0 0.057
0.09384 0.0942 0.09456 0.09492 0.09528 0.09564 0.096 0.043
0 0 0 0 0 0 0
0.10532 0.1056 0.10588 0.10616 0.10644 0.10672 0.107 0.056

1.93 1.94 1.95 1.96 1.97 1.98 1.99 2 CASE

0.0636 0.0638 0.064 0.0642 0.0644 0.0646 0.0648 0.065 1 - 0.032
0.06688 0.06704 0.0672 0.06736 0.06752 0.06768 0.06784 0.068 2 - 0.037
0.08276 0.08308 0.0834 0.08372 0.08404 0.08436 0.08468 0.085 3 - 0.037
0.08904 0.08932 0.0896 0.08988 0.09016 0.09044 0.09072 0.091 4 - 0.047
0.06788 0.06804 0.0682 0.06836 0.06852 0.06868 0.06884 0.069 5 - 0
0 0 0 0 0 0 0 0 0 6 - 0.045
0.09532 0.09556 0.0958 0.09604 0.09628 0.09652 0.09676 0.097 7 - 0
0 0 0 0 0 0 0 0 8 - 0.057
0 0 0 0 0 0 0 0 9 - 0

1.93 1.94 1.95 1.96 1.97 1.98 1.99 2 CASE

0.04788 0.04804 0.0482 0.04836 0.04852 0.04868 0.04884 0.049 1 + 0.024
0.05088 0.05104 0.0512 0.05136 0.05152 0.05168 0.05184 0.052 2 + 0.028
0.06332 0.06356 0.0638 0.06404 0.06428 0.06452 0.06476 0.065 3 + 0.028
0.06732 0.06756 0.0678 0.06804 0.06828 0.06852 0.06876 0.069 4 + 0.035
0.05116 0.05128 0.0514 0.05152 0.05164 0.05176 0.05188 0.052 5 + 0.035
0.08576 0.08608 0.0864 0.08672 0.08704 0.08736 0.08768 0.088 6 + 0.035
0.07188 0.07204 0.0722 0.07236 0.07252 0.07268 0.07284 0.073 7 + 0.043
0.09348 0.09384 0.0942 0.09456 0.09492 0.09528 0.09564 0.096 8 + 0.043
0.10504 0.10532 0.1056 0.10588 0.10616 0.10644 0.10672 0.107 9 + 0.056