Sunday, September 20, 2020, 02:54 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.33 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= SEP 20, 2020 *
* Time= 14:53:14 *
* *
* USER ID: *
****************************************************

1. STAAD SPACE DXF IMPORT OF FINAL.DXF

INPUT FILE: C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).STD
2. START JOB INFORMATION
3. ENGINEER DATE 18-SEP-20
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 2.46501 2 0; 2 2.46501 2 4.48543; 3 0 2 2.24249; 4 4.6239 2 2.24249
9. 5 0 2 4.48543; 6 0 2 0; 7 4.6239 2 4.48543; 8 4.6239 2 0; 9 2.46501 2 1.10657
10. 11 2.46501 2 2.24249; 12 0 0 4.48543; 13 0 0 0; 14 4.6239 0 4.48543
11. 15 4.6239 0 0; 16 2.46501 4.4 0; 17 2.46501 4.4 4.48543; 18 0 4.4 2.24249
12. 19 4.6239 4.4 2.24249; 20 0 4.4 4.48543; 21 0 4.4 0; 22 4.6239 4.4 4.48543
13. 23 4.6239 4.4 0; 24 2.46501 4.4 1.10657; 25 4.6239 4.4 1.10657
14. 26 2.46501 4.4 2.24249; 27 5.4739 4.4 2.24249; 28 5.4739 4.4 4.48543
15. 29 5.4739 4.4 0; 31 2.46501 7.2 0; 32 2.46501 7.2 4.48543; 33 0 7.2 2.24249
16. 34 4.6239 7.2 2.24249; 35 0 7.2 4.48543; 36 0 7.2 0; 37 4.6239 7.2 4.48543
17. 39 2.46501 7.2 1.10657; 40 4.6239 7.2 1.10657; 41 2.46501 7.2 2.24249
18. 42 5.4739 7.2 2.24249; 43 5.4739 7.2 4.48543; 44 5.4739 7.2 0
19. 46 2.46501 9.4 0; 47 2.46501 9.4 4.48543; 48 0 9.4 2.24249
20. 49 4.6239 9.4 2.24249; 50 0 9.4 4.48543; 51 0 9.4 0; 52 4.6239 9.4 4.48543
21. 54 2.46501 9.4 1.10657; 55 4.6239 9.4 1.10657; 56 2.46501 9.4 2.24249
22. 57 5.4739 9.4 2.24249; 58 5.4739 9.4 4.48543; 59 5.4739 9.4 0
23. 61 2.46501 11.4 0; 62 2.46501 11.4 4.48543; 63 0 11.4 2.24249
24. 65 0 11.4 4.48543; 66 0 11.4 0; 71 2.46501 11.4 2.24249
25. 72 5.4739 11.4 2.24249; 74 5.4739 11.4 0; 75 5.4739 4.4 1.12125
26. 76 5.4739 7.2 1.12125; 77 5.4739 9.4 1.12125; 78 2.46501 0 0
27. 79 2.46501 0 4.48543
28. MEMBER INCIDENCES
29. 1 1 9; 2 3 11; 3 3 5; 4 4 7; 5 6 1; 6 5 2; 8 11 2; 9 9 11; 10 11 4; 11 6 3
30. 12 8 4; 14 1 8; 15 2 7; 16 12 5; 17 13 6; 18 14 7; 19 15 8; 20 1 16; 21 2 17
31. 23 4 19; 24 5 20; 25 6 21; 26 7 22; 27 8 23; 31 16 24; 32 18 26; 33 18 20
32. 34 19 22; 35 21 16; 36 20 17; 37 24 75; 38 26 17; 39 24 26; 40 26 19; 41 21 18
33. 43 25 19; 44 16 29; 45 17 22; 46 19 27; 47 22 28; 50 29 75; 52 27 28; 53 26 11
34. 54 16 31; 55 17 32; 58 20 35; 59 21 36; 64 26 41; 65 27 42; 66 28 43; 67 29 44
35. 69 31 39; 70 33 41; 71 33 35; 72 34 37; 73 36 31; 74 35 32; 75 39 76; 76 41 32
36. 77 39 41; 78 41 34; 79 36 33; 81 40 34; 82 31 44; 83 32 37; 84 34 42; 85 37 43
37. 88 44 76; 90 42 43; 91 31 46; 92 32 47; 95 35 50; 96 36 51; 101 41 56
38. 102 42 57; 103 43 58; 104 44 59; 106 46 54; 107 48 56; 108 48 50; 109 49 52

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 1 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 2

39. 110 51 46; 111 50 47; 112 54 77; 113 56 47; 114 54 56; 115 56 49; 116 51 48
40. 118 55 49; 119 46 59; 120 47 52; 121 49 57; 122 52 58; 125 59 77; 127 57 58
41. 128 46 61; 129 47 62; 132 50 65; 133 51 66; 138 56 71; 139 57 72; 141 59 74
42. 143 61 71; 144 63 71; 145 63 65; 147 66 61; 148 65 62; 150 71 62; 152 71 72
43. 153 66 63; 156 61 74; 162 74 72; 164 75 27; 166 76 42; 168 77 57; 170 1 78
44. 171 2 79
45. START GROUP DEFINITION
46. FLOOR
47. _2F2W1 31 TO 33 35 36 38 39 41
48. _2F2W2 34 37 TO 40 43 45 46 164
49. _2F1W1 34 46 47 52
50. _2F1W2 31 37 44 50
51. _3F2W1 69 TO 71 73 74 76 77 79
52. _3F2W2 72 75 TO 78 81 83 84 166
53. _3F1W1 72 84 85 90
54. _3F1W2 69 75 82 88
55. _4F2W1 106 TO 108 110 111 113 114 116
56. _4F2W2 109 112 TO 115 118 120 121 168
57. _4F1W1 109 121 122 127
58. _4F1W2 106 112 119 125
59. JOINT
60. END GROUP DEFINITION
61. DEFINE MATERIAL START
62. ISOTROPIC CONCRETE
63. E 2.17185E+07
64. POISSON 0.17
65. DENSITY 23.5616
66. ALPHA 1E-05
67. DAMP 0.05
68. TYPE CONCRETE
69. STRENGTH FCU 27579
70. END DEFINE MATERIAL
71. MEMBER PROPERTY AMERICAN
72. 54 55 58 59 64 91 92 95 96 101 128 129 132 133 138 PRIS YD 0.3 ZD 0.3
73. 1 TO 6 8 TO 12 14 15 31 TO 36 38 TO 41 43 TO 47 50 52 69 TO 74 76 TO 79 81 -
74. 82 TO 85 88 90 106 TO 111 113 TO 116 118 TO 122 125 127 164 166 -
75. 168 PRIS YD 0.4 ZD 0.2
76. 37 75 112 PRIS YD 0.3 ZD 0.2
77. 65 TO 67 102 TO 104 139 141 PRIS YD 0.35 ZD 0.3
78. MEMBER PROPERTY AMERICAN
79. 143 TO 145 147 148 150 152 153 156 162 PRIS YD 0.3 ZD 0.2
80. MEMBER PROPERTY AMERICAN
81. 16 TO 21 23 TO 27 53 170 171 PRIS YD 0.37 ZD 0.37
82. CONSTANTS
83. MATERIAL CONCRETE ALL
84. MEMBER RELEASE
85. 37 75 112 START MZ
86. 37 75 112 END MZ
87. SUPPORTS
88. 12 TO 15 78 79 PINNED
89. DEFINE REFERENCE LOADS
90. LOAD R1 LOADTYPE DEAD TITLE REF LOAD - DL
91. SELFWEIGHT Y 1
92. FLOOR LOAD
93. _2F2W1 FLOAD 5.06 GY
94. _2F2W2 FLOAD 5.06 GY

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 2 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 3

95. ONEWAY LOAD

96. _2F1W1 ONE 5.06 GY
97. _2F1W2 ONE 5.06 GY
98. MEMBER LOAD
99. 33 35 36 41 44 45 47 50 52 164 UNI GY 7.152
100. FLOOR LOAD
101. _3F2W1 FLOAD 5.06 GY
102. _3F2W2 FLOAD 5.06 GY
103. ONEWAY LOAD
104. _3F1W1 ONE 5.06 GY
105. _3F1W2 ONE 5.06 GY
106. MEMBER LOAD
107. 71 73 74 79 82 83 85 88 90 166 UNI GY 5.365
108. FLOOR LOAD
109. _4F2W1 FLOAD 5.06 GY
110. _4F2W2 FLOAD 5.06 GY
111. ONEWAY LOAD
112. _4F1W1 ONE 5.06 GY
113. _4F1W2 ONE 5.06 GY
114. MEMBER LOAD
115. 108 110 111 116 119 120 122 125 127 168 UNI GY 5.066
116. 143 150 UNI GY 1.752
117. 162 UNI GY 1.15
118. 145 153 UNI GY 0.983
119. 3 TO 6 11 12 14 15 UNI GY 6.22
120. END DEFINE REFERENCE LOADS
121. FLOOR DIAPHRAGM
122. DIA 1 TYPE RIG HEI 2 JOINT 1 TO 9 11
123. DIA 2 TYPE RIG HEI 4.4 JOINT 16 TO 29 75
124. DIA 3 TYPE RIG HEI 7.2 JOINT 31 TO 37 39 TO 44 76
125. DIA 4 TYPE RIG HEI 9.4 JOINT 46 TO 52 54 TO 59 77
126. DIA 5 TYPE RIG HEI 11.4 JOINT 61 TO 63 65 66 71 72 74

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.

MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 3 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 4

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE

--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS MASTER JOINT NO.
X Z

1 RIGID 2.000 215.15 2.372 2.243 80

2 RIGID 4.400 389.83 2.795 2.239 81
3 RIGID 7.200 343.10 2.832 2.239 82
4 RIGID 9.400 327.46 2.807 2.222 83
5 RIGID 11.400 65.21 2.391 1.912 84

************************************************************************************

128. DEFINE UBC LOAD

129. ZONE 0.4 I 1 RWX 8.5 RWZ 8.5 STYP 4 NA 1 NV 1
130. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE

WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

131. R1 1.0
132. CHECK SOFT STORY ASCE7
133. LOAD 1 LOADTYPE SEISMIC TITLE EX
134. UBC LOAD X 1 DEC 1 ACC 0.05
135. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 72 NUMBER OF MEMBERS 117

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 65/ 14/ 217 DOF

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 4 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 5

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 231

TOTAL LOAD COMBINATION CASES = 0 SO FAR.
SIZE OF STIFFNESS MATRIX = 51 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.7/ 722071.9 MB

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 2.00 OK OK
2 4.40 OK OK
3 7.20 OK OK
4 9.40 OK OK
5 11.40 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

***********************************************************
* *
* X DIRECTION : Ta = 0.454 Tb = 0.577 Tuser = 0.000 *
* T = 0.577, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1360.11 = 176.01 KN *
* *
***********************************************************

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 5 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 6

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 1 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 2.00 0.00 0.00 0.23 0.22 0.00 0.22

2 4.40 0.00 0.00 0.27 0.22 0.00 0.22
3 7.20 0.00 0.00 0.27 0.22 0.00 0.22
4 9.40 0.00 0.00 0.27 0.22 0.00 0.22
5 11.40 0.00 0.00 0.27 0.22 0.00 0.22

************************************************************************

136. CHANGE
137. LOAD 2 LOADTYPE SEISMIC TITLE EZ
138. UBC LOAD Z 1 DEC 1 ACC 0.05
139. PERFORM ANALYSIS

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 6 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 7

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 2.00 OK OK
2 4.40 OK OK
3 7.20 OK OK
4 9.40 OK OK
5 11.40 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

***********************************************************
* *
* Z DIRECTION : Ta = 0.454 Tb = 0.597 Tuser = 0.000 *
* T = 0.454, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1360.11 = 176.01 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 7 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 8

LOAD NO.: 2 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 2.00 0.00 0.00 0.23 0.22 0.23 0.00

2 4.40 0.00 0.00 0.27 0.22 0.27 0.00
3 7.20 0.00 0.00 0.27 0.22 0.27 0.00
4 9.40 0.00 0.00 0.27 0.22 0.27 0.00
5 11.40 0.00 0.00 0.27 0.22 0.27 0.00

************************************************************************

140. CHANGE
141. LOAD 3 LOADTYPE DEAD TITLE DL
142. REFERENCE LOAD
143. R1 -1.0
144. LOAD 4 LOADTYPE LIVE TITLE LL
145. FLOOR LOAD
146. _2F2W1 FLOAD -1.9 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

147. _2F2W2 FLOAD -1.9 GY

148. ONEWAY LOAD
149. _2F1W1 ONE -1.9 GY
150. _2F1W2 ONE -1.9 GY
151. FLOOR LOAD
152. _3F2W1 FLOAD -1.9 GY
153. _3F2W2 FLOAD -1.9 GY
154. ONEWAY LOAD
155. _3F1W1 ONE -1.9 GY
156. _3F1W2 ONE -1.9 GY
157. FLOOR LOAD
158. _4F2W1 FLOAD -1.9 GY
159. _4F2W2 FLOAD -1.9 GY
160. ONEWAY LOAD
161. _4F1W1 ONE -1.9 GY
162. _4F1W2 ONE -1.9 GY
163. MEMBER LOAD

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 8 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 9

164. 143 150 UNI GY -1.64

165. 162 UNI GY -1.083
166. 145 153 UNI GY -0.921
167. LOAD COMB 5 GENERATED NSCP 2015 DRIFT 1
168. 3 1.2 4 0.5 1 1.0
169. LOAD COMB 6 GENERATED NSCP 2015 DRIFT 2
170. 3 1.2 4 0.5 2 1.0
171. LOAD COMB 7 GENERATED NSCP 2015 DRIFT 3
172. 3 1.2 4 0.5 1 -1.0
173. LOAD COMB 8 GENERATED NSCP 2015 DRIFT 4
174. 3 1.2 4 0.5 2 -1.0
175. LOAD COMB 9 GENERATED NSCP 2015 DRIFT 5
176. 3 0.9 1 1.0
177. LOAD COMB 10 GENERATED NSCP 2015 DRIFT 6
178. 3 0.9 2 1.0
179. LOAD COMB 11 GENERATED NSCP 2015 DRIFT 7
180. 3 0.9 1 -1.0
181. LOAD COMB 12 GENERATED NSCP 2015 DRIFT 8
182. 3 0.9 2 -1.0
183. LOAD COMB 13 GENERATED NSCP 2015(1) ACI 318 1
184. 3 1.4
185. LOAD COMB 14 GENERATED NSCP 2015(1) ACI 318 2
186. 3 1.2 4 1.6
187. LOAD COMB 15 GENERATED NSCP 2015(1) ACI 318 3
188. 3 1.42 4 0.5 1 1.25
189. LOAD COMB 16 GENERATED NSCP 2015(1) ACI 318 4
190. 3 1.42 4 0.5 2 1.25
191. LOAD COMB 17 GENERATED NSCP 2015(1) ACI 318 5
192. 3 1.42 4 0.5 1 -1.25
193. LOAD COMB 18 GENERATED NSCP 2015(1) ACI 318 6
194. 3 1.42 4 0.5 2 -1.25
195. LOAD COMB 19 GENERATED NSCP 2015(1) ACI 318 7
196. 3 1.42 1 1.25
197. LOAD COMB 20 GENERATED NSCP 2015(1) ACI 318 8
198. 3 1.42 2 1.25
199. LOAD COMB 21 GENERATED NSCP 2015(1) ACI 318 9
200. 3 1.42 1 -1.25
201. LOAD COMB 22 GENERATED NSCP 2015(1) ACI 318 10
202. 3 1.42 2 -1.25
203. LOAD COMB 23 GENERATED NSCP 2015(1) ACI 318 11
204. 3 0.68 1 1.25
205. LOAD COMB 24 GENERATED NSCP 2015(1) ACI 318 12
206. 3 0.68 2 1.25
207. LOAD COMB 25 GENERATED NSCP 2015(1) ACI 318 13
208. 3 0.68 1 -1.25
209. LOAD COMB 26 GENERATED NSCP 2015(1) ACI 318 14
210. 3 0.68 2 -1.25
211. LOAD COMB 27 GENERATED NSCP 2015(2) ACI FOOTING 1
212. 3 1.0 4 1.0
213. LOAD COMB 28 GENERATED NSCP 2015(2) ACI FOOTING 2
214. 3 0.6 1 0.71
215. LOAD COMB 29 GENERATED NSCP 2015(2) ACI FOOTING 3
216. 3 0.6 2 0.71
217. LOAD COMB 30 GENERATED NSCP 2015(2) ACI FOOTING 4
218. 3 0.6 1 -0.71
219. LOAD COMB 31 GENERATED NSCP 2015(2) ACI FOOTING 5

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 9 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 10

220. 3 0.6 2 -0.71

221. LOAD COMB 32 GENERATED NSCP 2015(2) ACI FOOTING 6
222. 3 1.0 4 1.0 1 0.71
223. LOAD COMB 33 GENERATED NSCP 2015(2) ACI FOOTING 7
224. 3 1.0 4 1.0 2 0.71
225. LOAD COMB 34 GENERATED NSCP 2015(2) ACI FOOTING 8
226. 3 1.0 4 1.0 1 -0.71
227. LOAD COMB 35 GENERATED NSCP 2015(2) ACI FOOTING 9
228. 3 1.0 4 1.0 2 -0.71
229. PERFORM ANALYSIS

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05

-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S

----- ----------------- --------------------
X Z

1 2.00 OK OK
2 4.40 OK OK
3 7.20 OK OK
4 9.40 OK OK
5 11.40 OK OK

NOTE : NO SOFT STOREY IS DETECTED.

230. LOAD LIST 5 TO 12

231. PRINT DIA CR

************************************************************

CENTRE OF RIGIDITY UNIT - METE

------------------ -----------

DIAPHRAM FL. LEVEL X-COORDINATE Z-COORDINATE

1 2.000 2.476 2.244

2 4.400 2.673 2.297
3 7.200 2.981 2.229
4 9.400 3.049 2.188
5 11.400 3.039 2.133

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 10 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 11

************************************************************

232. PRINT STORY DRIFT 0.004200

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 11 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 12

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS

------------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 238

1 0.00 5 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

6 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
7 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
8 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
9 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
10 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
11 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
12 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

2 2.00 5 0.5151 -0.0310 0.5151 0.0310 L / 388 PASS

6 0.0371 0.5508 0.0371 0.5508 L / 363 PASS
7 -0.4257 -0.0189 0.4257 0.0189 L / 470 PASS
8 0.0524 -0.6007 0.0524 0.6007 L / 333 PASS
9 0.5026 -0.0239 0.5026 0.0239 L / 398 PASS
10 0.0246 0.5579 0.0246 0.5579 L / 358 PASS
11 -0.4382 -0.0118 0.4382 0.0118 L / 456 PASS
12 0.0399 -0.5936 0.0399 0.5936 L / 337 PASS

3 4.40 5 0.9970 -0.1356 0.4819 0.1046 L / 498 PASS

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 12 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 13

6 0.1564 0.8341 0.1193 0.2833 L / 847 PASS

7 -0.6256 -0.0742 0.1999 0.0553 L / 1200 PASS
8 0.2151 -1.0440 0.1627 0.4433 L / 541 PASS
9 0.9451 -0.1057 0.4425 0.0818 L / 542 PASS
10 0.1044 0.8641 0.0799 0.3062 L / 784 PASS
11 -0.6775 -0.0442 0.2393 0.0324 L / 1003 PASS
12 0.1632 -1.0140 0.1233 0.4204 L / 571 PASS

4 7.20 5 1.8479 -0.3319 0.8509 0.1962 L / 329 PASS

6 0.4515 1.1529 0.2951 0.3187 L / 878 PASS
7 -0.8067 -0.1916 0.1811 0.1174 L / 1545 PASS
8 0.5897 -1.6763 0.3746 0.6324 L / 443 PASS
9 1.7018 -0.2573 0.7567 0.1517 L / 370 PASS
10 0.3053 1.2274 0.2009 0.3633 L / 771 PASS
11 -0.9529 -0.1171 0.2754 0.0729 L / 1017 PASS
12 0.4436 -1.6018 0.2804 0.5878 L / 476 PASS

5 9.40 5 2.3108 -0.4868 0.4629 0.1550 L / 475 PASS

6 0.6193 1.2541 0.1678 0.1013 L / 1311 PASS
7 -0.8609 -0.2850 0.0542 0.0934 L / 2356 PASS
8 0.8306 -2.0259 0.2409 0.3496 L / 629 PASS
9 2.1074 -0.3770 0.4056 0.1197 L / 542 PASS
10 0.4159 1.3639 0.1105 0.1365 L / 1611 PASS
11 -1.0643 -0.1752 0.1115 0.0581 L / 1973 PASS
12 0.6272 -1.9161 0.1836 0.3143 L / 700 PASS

6 11.40 5 2.6275 -0.5640 0.3167 0.0772 L / 631 PASS

6 0.7365 1.3259 0.1172 0.0718 L / 1706 PASS
7 -0.8167 -0.3422 0.0443 0.0573 L / 3493 PASS
8 1.0744 -2.2322 0.2438 0.2062 L / 820 PASS
9 2.3734 -0.4354 0.2660 0.0583 L / 752 PASS

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 13 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 14

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS

------------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 238

10 0.4823 1.4546 0.0665 0.0907 L / 2206 PASS

11 -1.0708 -0.2135 0.0065 0.0384 L / 5212 PASS
12 0.8202 -2.1035 0.1930 0.1873 L / 1036 PASS
233. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= SEP 20,2020 TIME= 14:53:16 ****

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 14 of 15

 Sunday, September 20, 2020, 02:54 PM
DXF IMPORT OF FINAL.DXF -- PAGE NO. 15

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

C:\Users\shell\Desktop\De Leon Design\Staad Concrete Model\DE LEON DESIGN MODEL(FINAL).anl Page 15 of 15