Project: Arjo Dedessa Sugar Mills Factory Remaining work
Owner: Federal Democratic Republic of Ethiopia Sugar Corpora
Client: Arjo Dedessa Sugar Development Project office
Place: Arjo Dedessa ( 400Km west of Addis Ababa)
Item Description Unit Qty Unit Amount
No Rate
A SUB STRUCTURE
1.0 EXCAVATION & EARTH WORK
1.01 Site clearance around the buildings to m2 4824
the depth of 20cm
1.02 Bulk excavation around the buildings in M3 2894.4
ordinary soil to remove expansive soil
material to the depth of 60cm.
1.03 Fill around building to the depth of M3 2894.4
60cm in selected material from quarry
site well rolled and compacted in layers
not exceeding 20cm thick.
1.04 Load and cart away surplus excavated M3 3859.2
material to an appropriate tip.
2.0 CONCRETE WORK
2.01 50 mm lean concrete quality C-5, with m2 2524
minimum cement content of 150 kg /m3,
of concrete Under Stone Masonry
retaining Wall and under the bottom of
storm ditch
3.0 MASONRY
Hard trachytic orWORK
equivalent roughly
3.01 dressed stone masonry retaining wall M3 608
below ground level bedded in cement
mortar mix ratio (1:3)
3.02 Ditto but for exposed part above natural M3 1246
ground level.
B SUPER STRUCTURE
1.0 CONCRETE WORK
1.01 Reinforced concrete quality C-25, M3 65
360Kg/m3 of cement /m3 filled in to
formwork and vibrated around rod
reinforcement for overhead water
retaking tower and other remaining
1.02 Provide, cut and fix in position sawn m2 250
structural wood or steel formwork which
ever is appropriate.
2.0 BLOCK WORK
Factory Remaining work BOQ
Class B, 200mm thick HCB wall which
2.01 can satisfy the designed strength , m2 803.2
bedded in cement mortar (1:3).Price
shall include mortar bed
3. ROOFING
3.01 Roof Cover in galvanized corrugated m2 10500
Iron sheet ( G-24) or EGA-400,0.4mm
thick fixed to steel. Price includes G-28
flat sheet Dev. Length 330 ridge cap and
Supply and Fixwashers.
UV resistance G-28 galvanized flat
3.02 metal sheet gutter in accordance with Ml 1000
the Architectural detail drawing. Price
shall include all necessary accessories,
metal bracket suspenders, one coat of
anti-rust paint and two coat of synthetic
enamel paint. Development
length=700mm
3.03 Supply and fix G-28 flat metal down pipe ML 2800
as per the detail drawing. Price shall
include all necessary accessories
including metal bracket holder. Size 100
X100
3.04 Ditto but metal sheet flashing with dev. Pcs 220
Length 500mm
3.05 Ditto but copping with development Ml 400
length 300mm.
4.0 METAL WORKS
4.01 Door and Windows are manufactured
from 38x1.5mm LTZ profile and partially
covered with black iron sheet as per the
Engineer's approval and window door
schedule. Unit price includes one coat of
antirust and two coats of synthetic
enamel paint
Window
a) Size: 1200x500mm Pcs 2
b) Size: 1200x1800mm Pcs 19
C) Size: 1200x2400mm Pcs 37
d) Louver Window Size: 6500x900mm Pcs 106
e) Louver Window Size: 4500x500mm Pcs 14
Window doors
a) Size: 1000x1900 Pcs 1
5. STEEL STRUCTURE
Factory Remaining work BOQ
5.01 Mount steel truss according to the Pcs 11
structural drawing. Price shall include
one coat of antirust and two coats of
syntatic enamel painting and all other
necessary accessories( Truss structure
already fabricated)
5.02 Mount RHS Lattice top tie beam Pcs 1
( already fabricated)
5.03 Fix I-section (150x80x5mm) Purlins ml 2500
according to the structral Drawing
6. PLASTERING
6.01 Apply three coats of plastering in
cement mortar(1:3) up to fine finish.
Price shall include pre-cleaning and
preparation of the surface.
a) To the external wall surface and m2 803.2
exposed beams & columns
b)To the external wall surface and m2 803.2
exposed beams & columns
6.02 Apply Final coat of plastering in cement
mortar(1:3) up to fine finish.
a) To the external wall surface and m2 19126
exposed beams & columns
b) To the external wall surface and m2 19126
exposed beams & columns
7. FINISHING
7.01 m2 3340.4
150mm thick and 2m wide concrete
pavement in concrete class C-20 around
the building including 500mm selected
material compacted fill and 100mm thick
redash or equivalent bedding material.
water drainage around the pavement
7.02 ml 2267
the bed shall be concrete. Price shall
include red ash or equivalent bedding
material, jointing in cement mortar mix
1:2., lean concrete under the concrete
bed
7.03 Ditto as item 7.02 but with metal grill ml 90
cover where indicated on the drawing.
7.04 Buteminuse asphate Damp proof m2 1120
materials cover for flat roofs
8 GLAZING
8.01 4mm thick clear glass glazed to metal m2 163.6
beads and approved quality putty.
9.PAINTING
Factory Remaining work BOQ
9.01 Apply three coats of approved quality
plastic paint. Price shall include pre-
cleaning and preparation of surfaces.
a) To the external wall surface and m2 19929
exposed beams & columns
b) To the external wall surface and m2 19929
exposed beams & columns
Factory Remaining work BOQ
Amount
Factory Remaining work BOQ
