Scribd
Upload
5 views1 page

Assignment

The document outlines the design requirements for two columns: one to support a design axial load of 550 kN and a bending moment of 200 kNm using C-30 concrete and S-400 steel, with an approximate width-to-height ratio of 0.6; the second column supports a flat slab with a factored load of 1000 kN and design moments of Mxx=120 kNm and Myy=100 kNm, using C-30 concrete and S-300 steel, with a height of 4 m. Both designs require consideration of structural integrity and material specifications. The document emphasizes the need for precise calculations to ensure safety and compliance with engineering standards.

Uploaded by

seyfugezahagn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5 views1 page

Assignment

The document outlines the design requirements for two columns: one to support a design axial load of 550 kN and a bending moment of 200 kNm using C-30 concrete and S-400 steel, with an approximate width-to-height ratio of 0.6; the second column supports a flat slab with a factored load of 1000 kN and design moments of Mxx=120 kNm and Myy=100 kNm, using C-30 concrete and S-300 steel, with a height of 4 m. Both designs require consideration of structural integrity and material specifications. The document emphasizes the need for precise calculations to ensure safety and compliance with engineering standards.

Uploaded by

seyfugezahagn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

1.

Design a column to sustain a design axial load of 550 KN acting with a design bending moment of
200 KNm including all other effects. use C-30, steel S- 400 class I work. Approximate b=0.6h.

2. A column resting on an independent footing supports a flat slab. The super imposed factored load
transferred from the slab is 1000 kN. Design moment is Mxx=120KN.m Myy =100KN.m Use
concrete C30, steel S300 and class I works. Assume column height h = 4 m. design the column

You might also like