GUL ZXRAN Base Station

Commissioning and Configuration

Integration
CONTENTS

 Comissioning Preparation
 Configure Planning Template
 Setup Job
 Configuration in UME
Debugging Preparation

Commissioning Mode Preparations

WebLMT, and temporary IP  Tools: a debugging PC installed with the Windows
addresses operating system, and network cables
 Software: Google Chrome browser, and site
transport plan
PnP  Tools: a debugging PC installed with the Windows
operating system, and network cables
 Software: EID of the VSW board
Scripts  Tools: a debugging PC installed with the Windows
operating
system, and network cables
 Software: debugging software, software package,
and complete .xml files

© ZTE All rights reserved

PC Configuration

 The following figure shows the connections between the ITBBU (V9200) and the
debugging PC, and between the ITBBU (V9200) and the transport network.

© ZTE All rights reserved

Commissioning Flow
Preparation
 Commissioning a Site by Using Temporary IP
Addresses and the WebLMT
UME Upload Version
 Applicable scene:
 1. The UME has been deployed Configure Planning
template
 2. The transport network has been ready
 Advantages: simple operation at the front UME Create Setup Job

end
Use WebLMT
 Disadvantages: need to go to the site, and Configure Site IP
need depends on UME and transport network.
Troubleshooting
If success N
and Re-create
in UME?
setup job and start it
Y
End

© ZTE All rights reserved

Upload Version in UME

 Login UME
 Open chrome browser ， input in the address bar:[Link] then enter;
 Browser must be Chrome ， it doesn't support other browser.
 The communication protocol for the address is the https protocol ， it doesn't support http
protocol.
 Close the browser agent.
 Tips may appear after enter:“Your connection is not a private connection.” ， Please click on the
following “Advanced - > Continue to IP (Insecurity) ”.
 Enter account and password.
 Open SPU

© ZTE All rights reserved

Upload Version in UME

 Uploading the Site Commissioning Software Package to the Software Repository:

© ZTE All rights reserved

Export Planning Template

 Method 1-Downloading a Template File:

 In Template Repository (2), there are already some templates we could select, find the template you
want(3), click Export(4)
 If no templates could meet the requirement, you can create a new setup template click (5)

© ZTE All rights reserved

Export Planning Template

 Method2-Export Template by Data Plan

1 2

© ZTE All rights reserved

CONTENTS

 Comissioning Preparation
 Configure Planning Template
 Setup Job
 Configuration in UME
Planning Parameters

 Abis / Iub Integrated Parameters

2G Service 2G Service
Site ID 2G Service IP 2G 2G Local BSC Remote Remote BSC
Subnet Gateway IP
2G VLAN SCTP Port ID SCTP Port SCTP IP Module
Mask
[Link] 192.168.102.
2011 [Link] 30 0 703 2011 21 2013 9 3

3G Service Remote
Site ID 3G Service IP 3G Service IP 3G 3G Local Remote SCTP
Gateway IP RNC ID SCTP
3G Subnet Mask VLAN SCTP Port IP
Port

[Link] [Link]
1013
1011 [Link] 30 2 1011 31 1013 7

© ZTE All rights reserved

Planning Parameters

 S1 Integrated Parameters

4G CP/UP 4G CP/UP 4G
4G CP/UP 4G S1-C Local 4G S1-C Remote 4G S1-C IP1 Remote
Interface Service CP/UP
Service IP SCTP Port SCTP Port SCTP IP MME1
Subnet Mask Gateway VLAN
[Link]
3 30 [Link] 903 4013 36412 [Link]

© ZTE All rights reserved

Planning Parameters

 OMC Channel Integrated Parameters

O&M Subnet O&M Gateway

Site O&M IP O&M VLAN
Mask IP

[Link] 29 [Link] 3900

O&M Subnet
OMC server IP SNTP server IP
Mask

[Link]
[Link] 24 3

© ZTE All rights reserved

Planning Parameters
 Cell parameters （ GUL)
SITE
Cell ID frequencyBand NCC BCC LAC
ID
GSM 2011 3 1800 0 0 214-63-1

SITE
Cell ID freqBandInd uarfcnDl PSC LAC RAC
ID
UMTS 1011 10111 1 10563 1 214-63-2 2

Central Central
carrier carrier
SITE Cell freqBa bandwidt cellRSPort
frequency frequency PCI TAC
ID ID ndInd h Num
of FDD of FDD
uplink downlink
LTE 4013 1 3 1740 1835 43 10 20 MHz 2

© ZTE All rights reserved

Planning parameters

 Site structure
 BBU : RRU ：
 Slot1: VSWd1  R8894E_M1821(A8A):GUL
 Slot3: VBPd1  R9222 M728090(AEA):GULI
 slot4: VBPc0  R8854H S2600(A6A):LTE
 Slot5: VPDc1
 slot6: VBPd0
 slot7: VPBd1
 slot8: VPBd1
 Slot13:VEMc1
 Slot14: VFC

© ZTE All rights reserved

Description of Template Format
1. Conventions of Table Header
The first row is the attribute name. Do not modify this row. Otherwise, the data in the Plan Template will
fail to be imported.
The second row is the field name of the attribute.
The third row gives the description about the value range of a field.
The fourth row is the specifications, restrictions, and examples of the field data configuration.
The fifth row provides the attributes of a field: whether the field is Primary Key, and whether it is required
to be filled in (I).
The rows from the sixth row provide the configuration data of each site.

1
2
3

5
© ZTE All rights reserved
Description of Template Sheets
 TemplateInfo: The TemplateInfo sheet provides the template information such as
the NE type, template type/version, and descriptions

© ZTE All rights reserved

Description of Template Sheets Index
 Index: the index of different template sheet

© ZTE All rights reserved

Planning Template-Global
 1 Fill in the planning data - global page parameters

© ZTE All rights reserved 19

 Planning Template-Site
 2 Fill in the planning data - site page parameters

© ZTE All rights reserved 20

Planning Template-BBU
 3. Fill in the planning data - BBU page parameters

© ZTE All rights reserved

Planning Template-RU
 4. Fill in the planning data - RU page parameters
 Multiple RRU records with the same attribute can be set to one row, and RU records with different
attributes can be set to different rows.

© ZTE All rights reserved

Planning Template-Cable
 5. Fill in the planning data - cable page parameters

© ZTE All rights reserved

Planning Template-IP
 6. Fill in the planning data - IP page parameters

© ZTE All rights reserved

Planning Template-Sctp
 7. Fill in the planning data - Sctp page parameters

© ZTE All rights reserved

Planning Template-cell4g
 8.1 Fill in the planning data - cell4g page parameters
 Fill in LTE cell parameters

© ZTE All rights reserved

Planning Template-cell4g
 8.1 Fill in the planning data - cell4g page parameters

© ZTE All rights reserved

Planning Template-BtsFunction
 8.2 Fill in the planning data - BtsFunction page parameters
 site ID ： 2011

© ZTE All rights reserved

Planning Template-GCellEquipmentFunction

 9 Fill in the planning data - GCellEquipmentFunction page parameters

 R9222_1#ANT1#2 ： RU device moId#RU RF port moId#channel number
 Transmit Mode: 0 normal mode
 Receiving Mode: 0 2 diversity reception

© ZTE All rights reserved

Planning Template-GCell

 10 Fill in the planning data - GCell page parameters

 Cell ID: 1

© ZTE All rights reserved

Planning Template-GTrx
 11 Fill in the planning data - GTrx page parameters
 Trx ID:1 、 2
 Band ： 8 (900M)

© ZTE All rights reserved

Planning Template-NodeBFunction
 12 Fill in the planning data - NodeBFunction page parameters
 NodeB ID: 3012
 DL CE:65535 UL CE:65535

© ZTE All rights reserved

Planning Template-USector
 13 Fill in the planning data - USector page parameters
 Sector ID:1
 TxType:0 No diversity RxType:1 No diversity

© ZTE All rights reserved

Planning Template-ULocalCell

 14 Fill in the planning data - ULocalCell page parameters

 Local Cell ID:30121
 Tx Freq: 931.8 RxFreq: 886.8

© ZTE All rights reserved

Import Planning Template

 Click 【 Import Data 】 from the

Data Plan interface;
 Select the planning data file to be
imported, and ensure that the
import status is "finished".
 If the import status is failed, export
the result and modify the data,
repeat the procedure

© ZTE All rights reserved

Export LMT Package

 Click the successful Job Name, could Exporting the Package for Commissioning a
Site by Using the WebLMT

© ZTE All rights reserved

CONTENTS

 Comissioning Preparation
 Configure Planning Template
 Setup Job
 Configuration in UME
Creating Setup Job
 Method1-After importing planning data into UME, click on the operation of task
item "Setup" in "Data Plan" to jump to the new setup job interface, select
the target version package and click on confirmation to complete the creation
of the setup job.

© ZTE All rights reserved

Creating Setup Job
 Method2-select 【 Setup Job 】 interface ， Click on the “New Setup Job”
button

© ZTE All rights reserved

Creating Setup Job
Job Successfully Created ， select the NE and start the task:

© ZTE All rights reserved

Set IP by LMT
 Open WebLMT and enter Initial Site Setup, Configure site IP

© ZTE All rights reserved

CONTENTS

 Comissioning Preparation
 Configure Planning Template
 Setup Job
 Configuration in UME
Check Parameters on UME
 Select RANCM > General Configuration to open the MO Content page.

1
2

© ZTE All rights reserved

Check Parameters on UME

 Select “All”paramers, it will

show all the parameters of
the selected NE

© ZTE All rights reserved

Check OAM Channel Parameters on UME

 OAM channel

© ZTE All rights reserved

Check Equipment Parameters on UME

 Check equipment info and modify equipment hardware by replacebleUnit.

© ZTE All rights reserved

Check Equipment Parameters on UME
 Check Optical interface configuration and transport interface configuration

© ZTE All rights reserved

Check Equipment Parameters on UME
 Check fiber info between BP and RRU.

© ZTE All rights reserved

Check Support Function Parameters on UME

 Check time configuration

© ZTE All rights reserved

Check Support Function Parameters on UME

 Check SNTP configuration

© ZTE All rights reserved

Check Transport Network Parameters on UME

 Check Ethernet Interface configuration

© ZTE All rights reserved

Check Transport Network Parameters on UME
 Check Interface configuration

© ZTE All rights reserved

Check Transport Network Parameters on UME

 Check IP configuration

© ZTE All rights reserved

Check Transport Network Parameters on UME

 Check Servicemap LTE

© ZTE All rights reserved

Check TransportNetwork Parameters on UME
 Check Servicemap UMTS

© ZTE All rights reserved

Check Transport Network Parameters on UME
 Check Servicemap GSM

© ZTE All rights reserved

Check Transport Network Parameters on UME
 Check SCTP parameters

© ZTE All rights reserved 57

Check LTE Cell Parameters on UME
 Check PLMN

© ZTE All rights reserved

Check LTE Cell Parameters on UME

 Check LTE cell basic parameters

© ZTE All rights reserved

Check LTE Cell Parameters on UME

 Check LTE CP resource

© ZTE All rights reserved

Check LTE Cell Parameters on UME
 Check LTE CP resource

© ZTE All rights reserved

Check LTE Cell Parameters on UME

 Check LTE CP resource

© ZTE All rights reserved

Check GSM Cell Parameters on UME
 Check BtsFunction

© ZTE All rights reserved

Check GSM Cell Parameters on UME

 Check Plmn,BtsM

© ZTE All rights reserved

Check GSM Cell Parameters on UME

 Check GCell Config

© ZTE All rights reserved

Check GSM Cell Parameters on UME

 Check GTrx

© ZTE All rights reserved

Check UMTS Cell Parameters on UME

 Check NodeBFunction

© ZTE All rights reserved

Check UMTS Cell Parameters on UME

 Check USector

© ZTE All rights reserved

Check UMTS Cell Parameters on UME

 Check UlocalCell - part 1

© ZTE All rights reserved

Check UMTS Cell Parameters on UME

 Check UlocalCell - part 2

© ZTE All rights reserved

Check NE Status on UME

 At present, the UME can only view the BSC and RNC parameters, but cannot modify them. It
needs to be modified by connecting to the EMS via LEM.

© ZTE All rights reserved

Thank you!