Scribd
Upload
12 views1 page

Column Design of (G+0)

The document outlines the design specifications for a short column with dimensions of 5000 mm length, 250 mm width, and 250 mm depth. It details material strengths, axial loads, and reinforcement requirements, indicating a required axial load capacity of 243 kN, which is safely met with a calculated capacity of 688.58 kN. Additionally, the slenderness ratios are within acceptable limits for both axes.

Uploaded by

Amit kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views1 page

Column Design of (G+0)

The document outlines the design specifications for a short column with dimensions of 5000 mm length, 250 mm width, and 250 mm depth. It details material strengths, axial loads, and reinforcement requirements, indicating a required axial load capacity of 243 kN, which is safely met with a calculated capacity of 688.58 kN. Additionally, the slenderness ratios are within acceptable limits for both axes.

Uploaded by

Amit kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

COLUMN DESIGN OF(G+0)

* Column Detail

Length of Column = 5000 mm

Width of Column = 250 mm

Depth of Column = 250 mm


* Material Strength

Grade of Steel = 415 N/mm^2

Grade of Secondary Steel = 415 N/mm^2

Grade of Concrete = 20 N/mm^2


* Axial Load

Factored-Axial Load on Column = 243 kN


Factored-Moment At Minor (Axis)-Lex = 4.9 kN-M
Factored-Moment At Major (Axis)-Ley = 13.3 kN-M
Effective Length of Column = 3250 mm
Slenderness Ration =Lex/W = 13 < 12 LC
Slenderness Ration =Ley/D = 13 < 12 LC
*Remarks:Column to Design As Short Column….

Dia Primary R/f = 12 mm


Dia Secondary R/f = 0 mm
No's Primary R/f = 6 Nos
No's Secondary R/f = 0 Nos

= 40 mm
Clear Cover

d'/D W = 0.18
=
d'/D D 0.18
Axial Compressive Strength of Existing Column

=
Area of R/f Provided 678.2
=
Pt. Existing Column 1.09

Pu=0.4Fck*Ac+0.67*Fy*Asc
=
Axial Load Capacity 688.58 kN

Required Axial Load Capacity = 243 kN

Check For Biaxial Bending = 0.42 < 1

Safe

You might also like